Any one use sportmaster lowers on a straight hull Tiger?
#11
VIP Member
VIP Member
Thread Starter
thats the kind of info I needed, thank you...I was going to see if the standard length would help, but apparantly it wont unless you have high speeds.
#12
VIP Member
VIP Member
Thread Starter
#13
21 and 42 footers
Platinum Member
#14
VIP Member
VIP Member
Thread Starter
#16
21 and 42 footers
Platinum Member
#19
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Merc 540ci Bulldogs with 8-71 BlowerShop Blowers and CMI Elbow-tops.
In the 3-4 seasons....1 gear set chewed and a snapped vetical shaft on the other.
He runs the boat loose and is very good with the sticks on exit and re-entry.
Thats all I can think of, It baffles me too.
In the 3-4 seasons....1 gear set chewed and a snapped vetical shaft on the other.
He runs the boat loose and is very good with the sticks on exit and re-entry.
Thats all I can think of, It baffles me too.
#20
Rob my paint alone should get you that extra couple of MPH
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )