![]() |
Originally Posted by BRD
(Post 2055576)
Do these require 93 octane ?
|
call the double r guys in canada.....they have set up acouple fast 28's with 300's
|
TOPS those were X motors not the XS motors.... and they weren't fast compared to some of the US 28 Skaters!
RT |
Box Stock
Twin Modified motors( 2.5's and 300x) have pushed 28 Skaters over 125.
My question is where do the new XS motors stand in this comparison? T2x |
Originally Posted by dan lawrence
(Post 2055140)
I have 48hrs
12hrs over 6 grand the motors are awesome. fuel efficient durrable. Only issue is that they start to shut down at 6150 and go into gaurdian at 6300. I would imagine with the 1.62 gear ratio you will run out of prop like me. great engines. Dan I am going with 1.62 gear ratio, 14 1/2 x 32 cleaver 3 blades. When Jim was at at the Powerboat Mag test for the 30 skater, they ran 32s, but Jim & I are hoping we run out of prop and plan to try a 34. Frank F. |
300xs
My boat is runing 109 full of fuel or empty with 15x34 cleavers stock. I saw 112 on a flat calm day.
your boat easily will turn the 34's The boat ran 118 with the 280's 116 everyday so I know more speed is in it. dan |
Originally Posted by dan lawrence
(Post 2056444)
My boat is runing 109 full of fuel or empty with 15x34 cleavers stock. I saw 112 on a flat calm day.
your boat easily will turn the 34's The boat ran 118 with the 280's 116 everyday so I know more speed is in it. dan |
300xs
I have not weighed the boat. I don't think it is slower because I am on the rev limiters with the 34's. The motors stop making horsepower at 6100-6150 cylinders are flooded oil. The efficiency of the boat carry the boat to 6300 and the motors go into gaurdian mode.
If I had a set of 36 pitch props the boat would be faster. Basically its going to be difficult with the 07 model year motors to see 120 mph with out custom props. I would bet that eventually mercury will increase the rpms on the motors as they get more time. |
Dan I agree if your motors will pull the same speed empty or full. Horsepower is not the issue. Talk with BBlades about props. Maybe 4blades would help
|
| All times are GMT -5. The time now is 08:42 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.