300xs and 28 Skater
#15
Gold Member
Gold Member
I am going with 1.62 gear ratio, 14 1/2 x 32 cleaver 3 blades. When Jim was at at the Powerboat Mag test for the 30 skater, they ran 32s, but Jim & I are hoping we run out of prop and plan to try a 34.
Frank F.
#16
Registered
Join Date: Oct 2003
Location: sarasota,fl
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
300xs
My boat is runing 109 full of fuel or empty with 15x34 cleavers stock. I saw 112 on a flat calm day.
your boat easily will turn the 34's
The boat ran 118 with the 280's 116 everyday so I know more speed is in it.
dan
your boat easily will turn the 34's
The boat ran 118 with the 280's 116 everyday so I know more speed is in it.
dan
Last edited by dan lawrence; 03-13-2007 at 01:16 PM.
#17
Registered
Join Date: Dec 2002
Location: chesapeake bay md
Posts: 959
Likes: 0
Received 0 Likes
on
0 Posts
Dan So as of now the 300xs lost app.5mph compared to the 280ros ? Did the boat gain weight as a result of the pleasure conversation?
#18
Registered
Join Date: Oct 2003
Location: sarasota,fl
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
300xs
I have not weighed the boat. I don't think it is slower because I am on the rev limiters with the 34's. The motors stop making horsepower at 6100-6150 cylinders are flooded oil. The efficiency of the boat carry the boat to 6300 and the motors go into gaurdian mode.
If I had a set of 36 pitch props the boat would be faster.
Basically its going to be difficult with the 07 model year motors to see 120 mph with out custom props. I would bet that eventually mercury will increase the rpms on the motors as they get more time.
If I had a set of 36 pitch props the boat would be faster.
Basically its going to be difficult with the 07 model year motors to see 120 mph with out custom props. I would bet that eventually mercury will increase the rpms on the motors as they get more time.