Offshoreonly.com
Page 8 of 68
« First
6
7
8
9
10
18
58
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Work coming along on the Condo (https://www.offshoreonly.com/forums/general-boating-discussion/154034-work-coming-along-condo.html)

mrhorsepower1 03-30-2007 11:20 AM
Originally Posted by Panther (Post 2075838)
Hey Sak... I know of a 510 Cu. In. motor that made 760 hp a couple days ago and a 502 that made 866 hp....they both have steel heads too..... :evilb:

Get rid of those baby blowers and put 8-71's or a whipple on it! :drink:

Later, I'm outta here gotta go see a man from LI. ;)
No room for roots superchargers. Whipple would be nice just more money, and no drives to support 800+ horsepower

sakoutis3 03-30-2007 12:18 PM
1 Attachment(s)
Her's a shot of the gen set cover.

hunster 03-30-2007 01:57 PM
Originally Posted by Panther (Post 2075838)
Hey Sak... I know of a 510 Cu. In. motor that made 760 hp a couple days ago and a 502 that made 866 hp....they both have steel heads too..... :evilb:

Get rid of those baby blowers and put 8-71's or a whipple on it! :drink:

Later, I'm outta here gotta go see a man from LI. ;)
Sounds like someones on the dyno today! :cool:

Nick , Cover looks cool!:drink:

sakoutis3 03-30-2007 02:00 PM
Originally Posted by hunster (Post 2076172)
Sounds like someones on the dyno today! :cool:

Nick , Cover looks cool!:drink:
I hope he brought some extra duct tape and super glue just in case.:eek: :drink: :eek:

omerta one 03-30-2007 06:54 PM
"as smooth as a gravy sandwich.[/QUOTE]"

NICE!!!!

Panther 03-30-2007 08:10 PM
1 Attachment(s)
Originally Posted by sakoutis3 (Post 2076175)
I hope he brought some extra duct tape and super glue just in case.:eek: :drink: :eek:
Better get back to work and figure something else out cause you have some work to do bub..... :evilb: :evilb:

838 HP and 834 ft. lbs.

sakoutis3 03-31-2007 08:29 AM
I would be worried if you knew where the stops for your throttles were.:chick: But since that is an area that they haven't seen since the previose owner:rolleyes: beating you will not be an issue.:eek:

Panther 03-31-2007 05:47 PM
Originally Posted by sakoutis3 (Post 2076851)
I would be worried if you knew where the stops for your throttles were.:chick: But since that is an area that they haven't seen since the previose owner:rolleyes: beating you will not be an issue.:eek:
I don't think we'll have to worry about it cause the season will be over before we see ya. :drink:

mrhorsepower1 04-01-2007 10:24 AM
Originally Posted by Panther (Post 2075838)
Hey Sak... I know of a 510 Cu. In. motor that made 760 hp a couple days ago and a 502 that made 866 hp....they both have steel heads too..... :evilb:

Get rid of those baby blowers and put 8-71's or a whipple on it! :drink:

Later, I'm outta here gotta go see a man from LI. ;)
I have done 468's that made 840HP. What's your point......? And that was 20 years ago.

Panther 04-01-2007 01:43 PM
Originally Posted by mrhorsepower1 (Post 2077779)
I have done 468's that made 840HP. What's your point......? And that was 20 years ago.
Just busting Saks balls.. :D


All times are GMT -5. The time now is 10:21 PM.
Page 8 of 68
« First
6
7
8
9
10
18
58
Last »
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.