Michael Foerster

Which gas do you use on a 675 Keith Eickert engine.

Any ideas?

JIMKID Motorsports

ask gino just kidding

JoeD

I use 93 octane in mine.

Strip Poker 388

iTrader: (6)

I would think any engine up to 1000hp should beable to run on 93.unless its a lower budget built motor and is turned up to make the power

NASCAT

I ran 93 in mine w/o any problems. 700ft above sea level, hot & humid summers. The KE675 is pretty conservative only making approx 4lbs boost.

Jassman

92 Octane will work without damage,93 preferred.

JoeD

Actually I was just checking thru my papers and came across the spec sheet for the Eickert 675 and is says a "minimum of 89 octane"---if you would like I can fax the sheet to you just pm me your fax number.

Cigaretteman

Hi Joe,

I know this tread is very old.

Do you still have the spec. sheet for that engine? I would love to have a copy of that. Any chance you could scan it and mail it to me or maybe post a picture of it here?

Thanks

Cigaretteman

JoeD

When I get back to my office next week I will scan and post

mikes280

the engine calls for 89 or better ,you can run 89 but if i could get it i would run better then 89 just to be safe.