Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Does any one know this t-bred from MD (https://www.offshoreonly.com/forums/general-boating-discussion/154506-does-any-one-know-t-bred-md.html)

Sick Stinger 03-26-2007 05:52 PM

Does any one know this t-bred from MD
 
Here it is

Sick Stinger 03-26-2007 05:53 PM

3 Attachment(s)
Pics of the boat

Pwrbt33 03-26-2007 07:35 PM

Do you know where at in MD? I know of a few but cant make the picture very well. Any info on engine or even pictures?

John S.:D

Sick Stinger 03-26-2007 07:51 PM

3 Attachment(s)
here are a few more

Sick Stinger 03-26-2007 07:52 PM

Its a blown 502 i bought the boat at Performance Boats in Spotsville VA but he had no info about it and cant get me any though i would aslk the board

Sick Stinger 03-26-2007 08:09 PM

Pwr i have them in an email they are bigger there, just right click them and open them with Internext exsplorer ther are about double the size
It came from Severna Park MD thats was last address of registartion, Annopolis also came up i believe but thats the area

Pwrbt33 03-26-2007 08:45 PM

I remember the boat. The motor I believe was redone by MDG Performance in Annapolis. The gent that use to own it was or is a tennis teacher. He mostly use to just run out the marina and tan. That was a few years ago. Last time I remember the boat it was a blown 509. If Dave made it bigger I dont know. Hopefully he will chime in. It use to be rack staorage kept at a marina in severn. believe it was Podicory Point. If its the one, its not as clean as it once was. And, the boat use to have a swim platform on it at one time.

I'll try to remember more for you.

John S.:D

Pwrbt33 03-26-2007 08:56 PM

Dave Gavadis is the guy that serviced the boat after me and I believe may have redone the engine. The original engine was done by the company I use to work for years ago in Glen Burnie, MD.. Hopefully Dave will be able to give you some insight. The guy that use to ownit, I want to say his name was ...it'll come to me.:(

Sorry Dave, hope I didnt slander the last name!

John S.

Ted G 03-26-2007 09:10 PM

Dave goes by MDG Performance here on OSO. Check the Superboat section-they just built him a Y2K. If I remember correctly that boat lived on my river for quite a while. The guy that owned it is in a cruiser now. If it's the one I'm thinking of I saw him gettin a little sumthin sumthin one night on the bow at an anchorage over here :D :D Might want to disinfect a little :D

Sick Stinger 03-26-2007 09:22 PM

Thanks guys this is helping of course yes he was a tessin something i know that much and it has a name on the valve covers that i will get tommorrow its is lown as you can see it was supposidly rebuilt not that long ago low hours. The guys name i cant remeber but i will find it also there is a platform on it just took it off and got it painted. One othe rthing is the boat was a mess when i got it i just pretty much went right threw it. Cleaned the crap out of everything and buffed the boat polish buffed it and wax it when i took the pics has looked this good since i bought. It was listed as a 502 so i dont know if its a 509 mcould be but not sure is it worth calling th ecompney on the V-Cover? for info on the motor

Pwrbt33 03-26-2007 09:27 PM

I would probably just stick with calling Dave up at DGM.:D

Sick Stinger 03-26-2007 09:27 PM

Cant remeber its a 406 or 410 number or somehtign would it help if i walked out there and looked also want to meet me in the chat make it easier?

Sick Stinger 03-26-2007 09:28 PM

Do you know DGM's number???? so i can call tomorrow big help of course and thankyou

Pwrbt33 03-26-2007 09:28 PM

Ok!

Pwrbt33 03-26-2007 09:30 PM

410 something, give it a minute, it'll show up.

Sick Stinger 03-26-2007 09:49 PM

sounds good ill call you tomorrow john

Ted G 03-26-2007 11:01 PM

MDG PERFORMANCE MARINE. 832 Shore Drive, Edgewater, MD 21037 (410) 956-5381, Fax: (410) 956-2973

Ask for Dave Gavatos, owner. He is likely the one that built your motor.

Pwrbt33 03-27-2007 05:25 AM

Thanks Ted

Sick Stinger 03-27-2007 07:26 AM

Thanks Ted and Thankyou also John

Sick Stinger 03-27-2007 10:58 AM

Thanks for the info john good talking to you

Pwrbt33 03-27-2007 11:21 AM

Ditto !:D

Spicy 03-27-2007 11:24 AM

Not one to spread rumors but that looks awfully familiar to the boat that Art Lilly was putting a new transom in this time last year???? The original was rotted out.....

OldSchool 03-27-2007 11:45 AM


Originally Posted by Spicy (Post 2072338)
Not one to spread rumors but that looks awfully familiar to the boat that Art Lilly was putting a new transom in this time last year???? The original was rotted out.....

Is that the boat that barrelrolled during a sea trial in the South River when it was new from the dealer?

Spicy 03-27-2007 11:49 AM


Originally Posted by OldSchool (Post 2072361)
Is that the boat that barrelrolled during a sea trial in the South River when it was new from the dealer?

Yes, I believe it was, unfortunately I was there that day.....It was the T-Breds dealers Open House .....

Sick Stinger 03-27-2007 11:56 AM

This does not seem like good news

Spicy 03-27-2007 12:06 PM


Originally Posted by Sick Stinger (Post 2072375)
This does not seem like good news

Sorry, just telling you what I remember.... Good Luck with it..

Sick Stinger 03-27-2007 01:10 PM

Does anyone have Arts number would like to give him a call. Also i looked at the transom and also clean the whole boat i cant see any blending or cuts marks in the transom or that the platform had been off before

Pwrbt33 03-27-2007 05:35 PM

That was not the boat that flipped. The boat that did flip was named "FLIPPED OUT" and I know the person very well who owned it.

John S.:D

Arts # is 410-384-1666

Sick Stinger 03-27-2007 07:50 PM

Thanks John i will give him a call


All times are GMT -5. The time now is 12:27 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.