Originally Posted by [email protected] (Post 2100916)

those things dont look to have much flex appeal. seems as though something should give a little.

Originally Posted by Strip Poker 388 (Post 2102722)

They say it worth about 1 mph ,so I bet it does have some presure on it.Lexan they say was 3 times the price and doesent hold up as good in the sun?

Originally Posted by Brent Medley (Post 2104587)

Hey Rob, I ran mine last weekend again.........kind of getting used to the "no windshield thing" as long as you got good sunglasses. $2000 will buy a lot of beer this summer! I'll PM you when I get a chance to let you know how my new 32p props did.

Originally Posted by AcryliCo (Post 2095519)

I think it cracked because of that sharp edge at the bottom where it goes on the deck - it has to be polished, not for looks but because the striations of the grinder at such a sharp place will get a crack started. It will then look for the nearest stress point - the hole - and it's on it's way. Acrylic does expand and contract way more than fiberglass - about 1/8" in the beam of that boat on extreme temp changes. I've seen it both crack or shear mounting bolts on a yacht that went from Lauderdale to NY in winter...