New Yamaha 350 Outboard?
What do you guy's know about this new engine? We had a staff meeeting this morning , we have decided to build a 38 CC. The bottom plug is sitting at the shop and we'll be working on the deck / liner soon. Can't wait!
http://www.lake-link.com/info/pressr...sReleaseID=137 |
804 lbs.:eek: :eek: :eek: :eek: Yikes!
600 new parts:eek: Someone else go first............I'd be using the Merc 300XS. |
804lbs.....gawd, thats heavy. Better be a strong transom.
|
Originally Posted by tblrklakemo
(Post 2106871)
804lbs.....gawd, thats heavy. Better be a strong transom.
|
Originally Posted by BUIZILLA
(Post 2107030)
a pair of 175 or 200's weighs 816, so what's the big deal??
|
I want to check one of those out.Hell that's like throwing a pickup motor upright!
|
Originally Posted by cougarcat
(Post 2106866)
804 lbs.:eek: :eek: :eek: :eek: Yikes!
600 new parts:eek: Some one else go first............I'd be using the Merc 300XS. Triple 350 Yam 1050hp 2400lbs Thats alot of extra weight for 150hp |
Build an I/O center console like the old Scarab Sports
|
Yeah , I was all jacked up on the new yammy until I found out about the weight ..... Merc has the new Verado dialled in pretty good ..... the 300xs requires good fuel ..... If you do the math , the 300 HPDI is still has the best power to wt. ratio , unless you can run the good fuel all the time ... which I cannot:mad: .... Brian , I will be following this very closely !:cool: Whats you expected first build date ?
|
Originally Posted by BRD
(Post 2107474)
Yeah , I was all jacked up on the new yammy until I found out about the weight ..... Merc has the new Verado dialled in pretty good ..... the 300xs requires good fuel ..... If you do the math , the 300 HPDI is still has the best power to wt. ratio , unless you can run the good fuel all the time ... which I cannot:mad: .... Brian , I will be following this very closely !:cool: Whats you expected first build date ?
I'm waiting on quotes now from several tooling companies. Early 08 for sure! We're going to offer some " BLOWOUT" deals to help pay for the tooling. I'll keep you posted. |
All times are GMT -5. The time now is 01:54 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.