Looking For 496 Mag Silent Choice
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,727
Received 368 Likes
on
247 Posts
Looking For 496 Mag Silent Choice
boat actually has Corsa 50/50 but I need a used set of real silent choice. Y pipe is already there of course.
Also need for another boat wiring harness for silent choice with the king of black resistance that is roughly 3-4 inches long by 1/2 inches wide (kind of a cylinder)
e-mail or pm me please!
Also need for another boat wiring harness for silent choice with the king of black resistance that is roughly 3-4 inches long by 1/2 inches wide (kind of a cylinder)
e-mail or pm me please!
#2
21 and 42 footers
Platinum Member
A buddy called me today and asked me if I knew anyone who wanted his silent choice stuff. I believe it came off 500's. I'll try to find more info. (Is this for the stock cast exhaust on the 496???)
#3
Platinum Member
Platinum Member
Thread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,727
Received 368 Likes
on
247 Posts
yes stock exhaust on 2005 496 mag. Apparently I need the one that fit on 496 cause other apparently won't fit...
Let me know! thanks for checking out!
Let me know! thanks for checking out!
#4
Gold Member
Gold Member
boat actually has Corsa 50/50 but I need a used set of real silent choice. Y pipe is already there of course.
Also need for another boat wiring harness for silent choice with the king of black resistance that is roughly 3-4 inches long by 1/2 inches wide (kind of a cylinder)
e-mail or pm me please!
Also need for another boat wiring harness for silent choice with the king of black resistance that is roughly 3-4 inches long by 1/2 inches wide (kind of a cylinder)
e-mail or pm me please!
I just took it all off and put on the cmi 496 header kit.
I did not pull the engin to remove the (I think its the y pipe)
I just put caps on them.
This is everything, exhaust manafoled, risers, some water
lines, all the stuff that was removed to install the header kit.
If you would like e-mail me at [email protected]
or call my cell 270 331-0695
Thanks Timmy.
#5
Platinum Member
Platinum Member
Thread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,727
Received 368 Likes
on
247 Posts
if I understand what you are saying, you have exactly what I have actuaaly on the boat. I need the real silent choice. The one that closes the straight pipe, and direct exhaust down below. What you have I think, does not have the solenoid that really blocks the straight pipe, right?
#9
Platinum Member
Platinum Member
Thread Starter
Join Date: Jun 2004
Location: St-Hyacinthe, quebec, canada
Posts: 7,727
Received 368 Likes
on
247 Posts
if you say it is what I asked for, can you e-mail me pictures to make sure? [email protected]
thanks!
thanks!