does MERC rebuild drives?
#1
Registered
Thread Starter
does MERC rebuild drives?
I purchased a bravo xr drive off the internet from someone who says that MERC rebuilt it and it only had 3 hours it. After I recieved it, it looked like chit and the serial number was missing. I called mercury racing and they said that they do not rebuild drives(only sell new ones). Does anyone have any idea what other MERC there would be?
Last edited by gsmith9898; 04-26-2007 at 04:30 PM.
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
What is it? Mercury remanufacturing does rebuild drives, and not any of the SSM stuff, but not for individuals.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#3
Charter Member#203
Charter Member
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,409
Received 14,714 Likes
on
3,786 Posts
Did they say merc or Mercury racing???
#6
Registered
Join Date: Feb 2005
Location: oceanport nj
Posts: 1,626
Likes: 0
Received 0 Likes
on
0 Posts
Aren't the merc rebuilds sold under quicksilver name? I know that was true with engines but there was paperwork with them and a serial number would definatly would be there for warranty purposes. I know my long blocks had serial #'s and a plate saying what they had done , over bore and crank bearings , crank cut. I think it were really done at mercury/mercruiser it would look like new.
#8
21 and 42 footers
Platinum Member
Is this the drive you are selling???? Is it messed up or just look bad. (I've been looking for a cheap spare, can get it fixed, and don't really care what it looks like)
Russ C.
Russ C.
#9
Registered
Thread Starter
Aren't the merc rebuilds sold under quicksilver name? I know that was true with engines but there was paperwork with them and a serial number would definatly would be there for warranty purposes. I know my long blocks had serial #'s and a plate saying what they had done , over bore and crank bearings , crank cut. I think it were really done at mercury/mercruiser it would look like new.