Offshoreonly.com
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   chrome guage bezels (https://www.offshoreonly.com/forums/general-boating-discussion/159154-chrome-guage-bezels.html)

tblrklakemo 05-24-2007 05:52 PM
chrome guage bezels
 
1 Attachment(s)
I would like to add chrome guage bezels to my dash.....anybody point me in the correct direction?

Thx

DiamondPerformance 05-24-2007 06:05 PM
What size do you need? Looks like 2-1/6 and 3-3/8.

tblrklakemo 05-24-2007 06:18 PM
Originally Posted by DiamondPerformance (Post 2139598)
What size do you need? Looks like 2-1/6 and 3-3/8.
Where do I measure from?

DiamondPerformance 05-24-2007 06:31 PM
Hole size.

DiamondPerformance 05-24-2007 06:48 PM
Closer look, They are 2-1/6 and 3-3/8.

tblrklakemo 05-24-2007 06:56 PM
Just unscrew from dash, and place in bezel and re-tighten down?

DiamondPerformance 05-24-2007 07:01 PM
You have to remove the wires from the gauge, remove the gauge, put the Bezal on the gauge, install.

tblrklakemo 05-24-2007 07:03 PM
Gotcha

DiamondPerformance 05-24-2007 07:06 PM
Originally Posted by tblrklakemo (Post 2139648)
Just unscrew from dash, and place in bezel and re-tighten down?
You might be talking about the rim, not a bezel. You have to send the gauge back to Livorsi to change the rim color.

tblrklakemo 05-24-2007 07:22 PM
Ok, without a rim change I will have a white rim sitting in a chrome bezel....kinda sucks.


All times are GMT -5. The time now is 10:47 PM.
Page 1 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.