Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Help identifying outdrive (https://www.offshoreonly.com/forums/general-boating-discussion/161167-help-identifying-outdrive.html)

cricketsman05 06-17-2007 10:03 PM

Help identifying outdrive
 
I have an outdrive that is on a 24' Searay that I need help properly identifying. The motor is a GM 350 V8 255 HP engine # 4499138, it has a velvet drive transmission model # MCM-C serial #09817, the prop is about 19 3/4". I believe this is either a TR, II-TR, or possibly a TRS. I am having to replace the lower housing, part # 1641-4854, and will have to replace all the bearings and seals. For me to order the seal and bearing kit I need to know excactly what I have. I have been all over the outdrive and cannot find any numbers any where. Thank you. If more info is needed please advise at to what you need.

tblrklakemo 06-17-2007 10:07 PM

need more info

Biggus 06-17-2007 10:27 PM

Sounds like you have a TR drive ( ability to swing a 20" prop) with a MercTrans. They were popular on older Sea Ray cruisers. If you have a hard time finding parts, the Konrad 520 is a direct bolt-on.

www.konradmarine.com
[email protected]

jhiguy377 06-18-2007 07:17 PM

I don't think it would be a MercTrans if its bolted to a Velvetdrive. I agree w/biggus that its probably a TR if its swinging a 19 3/4" diam. prop.


All times are GMT -5. The time now is 08:20 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.