Originally Posted by mrhorsepower1 (Post 2190122)

Frank....are you optimistic bro! Well there will not be high boost in this application. and do not forget we have no room for intercoolers....details too follow......I have numbers and they are getting to where we want to be! Ran engine on stock ECM mapping first with very good results. Changing mapping next. Ran engine yesterday and all day today. :drink:

Originally Posted by mrhorsepower1 (Post 2190122)

Frank....are you optimistic bro! Well there will not be high boost in this application. and do not forget we have no room for intercoolers....details too follow......I have numbers and they are getting to where we want to be! Ran engine on stock ECM mapping first with very good results. Changing mapping next. Ran engine yesterday and all day today. :drink:

Originally Posted by Panther (Post 2191386)

Dean, how did you make a full pull with a stock map?? :eek:

Was the fuel pressure jacked up or larger injectors installed? I would think the pulse width would need to be wider with all that extra flow with the Brodi's and/or increased boost?.... :confused:

Originally Posted by sakoutis3 (Post 2191450)

Your not gettin any numbers till its done:cool: and I spank your azz across the bay.

Originally Posted by Panther (Post 2191458)

Your building yourself a bay blaster huh? :chick: The bay will be the only place you can run that condo and you'll need the spare bravo in the cabin! :p

another weekend goes by without Sak... http://www.lucidideefastboats.com/20...accosjuly.html

Originally Posted by sakoutis3 (Post 2191464)

You've never run against me in the ocean.:cool: I wouldn't want to scare you :eek: right from the start.:evilb:

Originally Posted by Panther (Post 2191483)

Sak, you have the room on that 4 ft swim platform so install one of these. This way you can swap the drives out on the lift! :eureka: :drink:

Originally Posted by sakoutis3 (Post 2191500)

I've got enough room on the swim platform to use your Apache as a tender.:drink: :drink:

Originally Posted by Panther (Post 2191386)

Dean, how did you make a full pull with a stock map?? :eek:

Was the fuel pressure jacked up or larger injectors installed? I would think the pulse width would need to be wider with all that extra flow with the Brodi's and/or increased boost?.... :confused: