Mercury 280s K-Plane Pump & Ram Questions.
02-18-2011, 10:50 AM
#1
Registered
Thread Starter
Join Date: Dec 2007
Location: Madison, WI
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Mercury 280s K-Plane Pump & Ram Questions.
i am finishing up a 1985 30ft Velocity Twin Outboard Project.
I plan to re-install the 280s K-Planes that came with it.
I have a variety of the old style Merc Power Trim and K-Plane Pumps. I can't remember if the K-Plane Pumps are any stronger or faster than the trim puimps. Does anyone know?
I also plan to replace the Hydraulic Rams as they do not match. Other than Merc, does anyone have or know of another source I could get them from?
Is another indicator system available other than running manual cables up the dash?
Any info would be appreciated
Scott
608 347 0027
I plan to re-install the 280s K-Planes that came with it.
I have a variety of the old style Merc Power Trim and K-Plane Pumps. I can't remember if the K-Plane Pumps are any stronger or faster than the trim puimps. Does anyone know?
I also plan to replace the Hydraulic Rams as they do not match. Other than Merc, does anyone have or know of another source I could get them from?
Is another indicator system available other than running manual cables up the dash?
Any info would be appreciated
Scott
608 347 0027
Last edited by Scotty Boy; 02-18-2011 at 11:22 AM.
02-19-2011, 08:54 PM
#3
Registered
Has anyone tried SEI's merc replacement products?
http://www.sterndrive.cc/mm5/merchan...iserTrimSystem
http://www.sterndrive.cc/mm5/merchan...iserTrimSystem
