Vinyl graphics with "Anti-Slip" lettering
#3
Racer
Racer
There is a product for a 3M scotch print but it is not really noskid....I tried to get it but was told it wasn't what I thought it was. It is used in super markets for advertising not really good outdoors......
#4
there's gotta be some'thin out there. We were just at the Fountain factory a few days ago and the green Miccosukee Fountain had two logos on each side of the engine hatch that were cut out of a dark gray non skid type tape. not sure what it is but we are getting a few of them with the new race boat and i will see if they can tell me what the meterial is. we were actually just talking about this the other day, weather there was anything i could run (safely) through my plotter.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#5
I suppose you could make your own. Cut the vinyl and then BEFORE weeding, spray it with clear acrylic and sprinkle it with 3M glass beads used for reflective applications. That stuff has sort of the consistency of fine sand and doesn't change the color of the graphic.
#6
Registered
Thread Starter
#7
Registered
Thread Starter
there's gotta be some'thin out there. We were just at the Fountain factory a few days ago and the green Miccosukee Fountain had two logos on each side of the engine hatch that were cut out of a dark gray non skid type tape. not sure what it is but we are getting a few of them with the new race boat and i will see if they can tell me what the meterial is. we were actually just talking about this the other day, weather there was anything i could run (safely) through my plotter.
Glassdave,
I do think there has to be something out there. I appreciate any info you can find. Thanks Ted.
#8
Registered
I have an idea of something, but I'm not sure how it would hold up UV wise. Maybe only last one season. PM me if you want me to investigate. I don't think I can do letters, but if you want to stencil it yourself...
#9
Platinum Member
Platinum Member
You might try looking into stuff like Industrial/commercial anti-slip tapes. Found this website:
http://www.ecosafetyproducts.com/Saf...FQQfgAodtVd3nQ
http://www.ecosafetyproducts.com/Saf...FQQfgAodtVd3nQ
Thread
Thread Starter
Forum
Replies
Last Post
GO4BROKE
General Boating Discussion
2
03-09-2008 03:50 PM
Formula Outlaw
General Boating Discussion
14
06-22-2005 05:51 PM