Aries VS JE pistons
#1
Registered
VIP Member
Thread Starter
Aries VS JE pistons
I have never had a piston totally fail like this in 27 yrs.Anyone else having problems with JE pistons.This was the reason I missed emerald coast,what a *****.The rest were perfect and only about 10 hrs run time.After comparing the two JE is no comparison to the aries pistons i allways ran.
#3
Registered
VIP Member
Thread Starter
Hard to say but all were set up with the same clearance.The pin was still lose in the rod.I have burnt my share and have had wrist pin failures but nothing compared to this the piston was gone. Thanks
#5
Registered
I have never had a piston totally fail like this in 27 yrs.Anyone else having problems with JE pistons.This was the reason I missed emerald coast,what a *****.The rest were perfect and only about 10 hrs run time.After comparing the two JE is no comparison to the aries pistons i allways ran.
Where is the rest of the piston?
Whats the head look like?
#6
Registered
VIP Member
Thread Starter
#7
Registered
VIP Member
Thread Starter
Skater Brother
#8
Registered
Join Date: Apr 2001
Location: beaumont tx
Posts: 1,703
Likes: 0
Received 0 Likes
on
0 Posts
saw one that an engine builder took to much off the botom of the wrist pin boss on the piston to balance it, and it did not last long, hope this was not the issue for you.