Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Need Power Steering hose fitting thats on the rams >

Need Power Steering hose fitting thats on the rams

Notices

Need Power Steering hose fitting thats on the rams

Old 08-23-2007, 05:17 PM
  #1  
Rob
VIP Member
Thread Starter
iTrader: (6)
 
Strip Poker 388's Avatar
 
Join Date: Aug 2001
Location: Ms
Posts: 21,632
Received 6 Likes on 6 Posts
Default Need Power Steering hose fitting thats on the rams

I have had 2 failures on my Mayfair Steering lines on the steering rams.The rubber is failing inside the fitting ,the hose it fraying on the end and coming apart.Leaking and loosing steering I have the tool from Marine Machine to put them together etc, The rubber lines are I guess getting old ?

Were can I buy the chrome plated brass fittings in the pick?

Do they make a better hose than the Parker 225-6 hose?http://www.parker.com/hpd/products/s...sp?catdesc=225 I am guess thats what I have ?

Or should I just buy the Stainless ones form http://www.cpperformance.com/detail.aspx?ID=533 already made up?

Thanks
Rob



http://www.hydraulichouse.com/search...nufacturer=225

Pick has mandrel tool in it
Attached Thumbnails Need Power Steering hose fitting thats on the rams-emerald%2520beach%2520poker%2520run%25208-2007%2520098%2520%2528large%2529.jpg   Need Power Steering hose fitting thats on the rams-myco%2520trailer%25208-14-2007%2520005%2520%2528large%2529.jpg  
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Strip Poker 388 is offline  
Old 08-23-2007, 05:30 PM
  #2  
Registered
 
mikes280's Avatar
 
Join Date: Feb 2001
Location: charlotte nc.
Posts: 1,849
Likes: 0
Received 0 Likes on 0 Posts
Default

i alweays use all stainless. mine came from wpm
mikes280 is offline  
Old 08-23-2007, 07:04 PM
  #3  
Registered
 
Join Date: Jul 2007
Location: Austin,Texas
Posts: 2,111
Likes: 0
Received 1 Like on 1 Post
Default

Stainless is nice that the aeroquip or parker is probably tougher. If you kink the stainless its done, Most stainless lines are just teflon hose inside.
Jim
MOBILEMERCMAN is offline  
Old 08-24-2007, 11:41 AM
  #4  
Registered
iTrader: (2)
 
Join Date: Feb 2003
Location: Lafayette,La
Posts: 6,194
Received 293 Likes on 107 Posts
Default

did you call marine machine...what's the guy on here that does steering , allan4 or something??
open87 is offline  
Old 08-24-2007, 12:14 PM
  #5  
Rob
VIP Member
Thread Starter
iTrader: (6)
 
Strip Poker 388's Avatar
 
Join Date: Aug 2001
Location: Ms
Posts: 21,632
Received 6 Likes on 6 Posts
Default

Originally Posted by open72
did you call marine machine...what's the guy on here that does steering , allan4 or something??
Bing said use rubber,Ya know how he is ,real friendly on the phone

The guys doing the stainless are saying it want hold up is salt and will tarnish,Ive seen alot of stainless hoses on boats


Ill call wpm and see,Imco looks to have some also

Thanks
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Strip Poker 388 is offline  
Old 08-24-2007, 04:41 PM
  #6  
Registered
iTrader: (2)
 
Join Date: Feb 2003
Location: Lafayette,La
Posts: 6,194
Received 293 Likes on 107 Posts
Default

yeah , real friendly ...

i don't think sean made his up and i have not done mine , i have the fittings and was going to go with the non braided...

but.....


not like i wan't to do those lines twice too....
open87 is offline  
Old 08-24-2007, 08:46 PM
  #7  
VIP Member
VIP Member
 
offshoredrillin's Avatar
 
Join Date: Feb 2004
Location: Maryland
Posts: 12,190
Received 1,295 Likes on 449 Posts
Default

rob, check a local hydraulic place that makes hoses, they will have everything and preesure fit the ends, had them made for my 311 in an emergency and it was about 50 bucks, they should have stainless too.
offshoredrillin is offline  
Old 08-25-2007, 07:56 AM
  #8  
Rob
VIP Member
Thread Starter
iTrader: (6)
 
Strip Poker 388's Avatar
 
Join Date: Aug 2001
Location: Ms
Posts: 21,632
Received 6 Likes on 6 Posts
Default

Originally Posted by offshoredrillin
rob, check a local hydraulic place that makes hoses, they will have everything and preesure fit the ends, had them made for my 311 in an emergency and it was about 50 bucks, they should have stainless too.

Rob Ive already wasted my time cking with our local hose place, The need the reusable chrome plated brass end like what on the boat or stainless.Remember Iam in Mississippi
__________________
.

The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Strip Poker 388 is offline  
Old 08-25-2007, 12:41 PM
  #9  
Charter Member # 55
Charter Member
 
Griff's Avatar
 
Join Date: Oct 2000
Location: Omaha/LOTO
Posts: 19,548
Received 1,812 Likes on 902 Posts
Default

Originally Posted by offshoredrillin
rob, check a local hydraulic place that makes hoses, they will have everything and preesure fit the ends, had them made for my 311 in an emergency and it was about 50 bucks, they should have stainless too.

I had to replace my hoses on the inside of the transom on my MM steering. None of the hydraulic hose places had the correct fittings. I ended up finding an aeroquip dealer and they made them with some 5000psi hose.
Griff is offline  
Old 08-25-2007, 01:15 PM
  #10  
VIP Member
VIP Member
 
offshoredrillin's Avatar
 
Join Date: Feb 2004
Location: Maryland
Posts: 12,190
Received 1,295 Likes on 449 Posts
Default

Originally Posted by Griff
I had to replace my hoses on the inside of the transom on my MM steering. None of the hydraulic hose places had the correct fittings. I ended up finding an aeroquip dealer and they made them with some 5000psi hose.
sorry to hear that guys, this is who we have around here http://www.colliflower.com/ and they do a great job.
offshoredrillin is offline  

Quick Reply: Need Power Steering hose fitting thats on the rams


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.