Ever installed or ran Cobra Power Motors
 

I would love to get some feedback from all of you who have ran, installed Cobra motors. I am considering going with either Cobra 675(540 cubic inch) or 725 (572 cubic inch)motors in place of my 500efi for my 37 Active Thunder. I was looking for some feedback on reilability, engine idle, durability etc... Thanks for the input. ;) :)

[ 01-12-2002: Message edited by: thunderdan ]

Call me.

hmmmmm. was that a "good" call me
or a "bad" call me..??

Just curious.. :)

should be a good "call me"...COBRA has been around for a while and a lot of the manufacturers seem to be using them.

It was neither. I haven't had any personal experience with Cobra, rather I was just telling Dan to give me a call.

I say tell us all, dont sugarcoat anything, the hell with being discreet :p

cobra has a bad repituation in sfla used parts in "new" motors ,oil leaks,not all parts sent with package,POOR RELIABILITY :eek: :eek:

GOFSTCAT, have you used Cobra motors in your rigging or is this hear say. Have you ever worked for COBRA.

Yea, that makes sense, two guys that sell parts, or rigging, give me something concrete instead of bull****

yea i am a rigger and i worked for the former owner and IHAVE FIRST HAND KNOWLAGE
AND HANDS ON EXPERIANCE