![]() |
500 EFI's
I posted in the technical section, but wanted the exposure here.
I am looking at a Top Gun with 500 EFI's and it is not enough power. Any easy ways to boost power with that engine ? rebuild top ends?? add supercharger ?? can I keep the injection with a supercharger like the new 600 or 700's? thanks for the inlut in advance |
500 EFI,s are a very good candidate for rebuilding with more H.P. I think they were getting pretty close to 600HP without supercharging.
|
I would guess that you talking about a non-stepped TG?
|
A buddy has a 94 gun with 500 EFI's...68-69 is all she'll do.
|
Depending on the hours on the engine, Vortech and Whipple make great kits without getting into the engine. I do recommend to get the heads off and do some maintenance and upgrades while you are at it either way. If you want to stay N/A, you can build a mild 650HP setup with 540ci's and Dart Alm. Heads.
|
Are you buying another one. I thought you were just wrapping up a redo on your Gun ??
|
Tyler Crockette was working on a upgrade to the 500 EFI when he boosted my carbed 500 to 650 hp. I would contact him. I think what you want to gain can be done without a problem. Then you might want to make sure your drive(s) are good that will be the next weekest link. Mine have been gone through as well and now I run turn key no problems well into the upper 90's with the boat full of fuel and people
|
Originally Posted by Semper Fi
(Post 2280007)
I would guess that you talking about a non-stepped TG?
|
Originally Posted by otis311
(Post 2280041)
Are you buying another one. I thought you were just wrapping up a redo on your Gun ??
I am just wrapping up with the re- do of the '98, but I want to get into a twin step. I just don't want to be afraid of the 500's and so far the input has been good that I can get anywhere from low 600HP to 700 HP without major overhaul, which will put me into the 90's ! |
Originally Posted by tanner
(Post 2279977)
can I keep the injection with a supercharger like the new 600 or 700's?
http://www.whipplesuperchargers.com/...sp?ProdID=1150 I'd be interested in the EFI intake pieces. |
| All times are GMT -5. The time now is 12:40 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.