Offshoreonly.com - 33' Apaches

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - 33' Apaches (https://www.offshoreonly.com/forums/general-boating-discussion/171497-33-apaches.html)

Panther

10-20-2007 09:05 PM

Quote:

Originally Posted by rockstrmkr (Post 2312113)

I may not get this entirely right, so feel free to correct me.
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....

I believe the one built for Ben's father is the one that's owned by the one I listed in my post above. He didn't mention any issues with handling characteristics. I believe it might be a cut down 36???

turbo2256b

10-22-2007 08:07 PM

.......

Panther

10-22-2007 09:03 PM

Quote:

Originally Posted by turbo2256b (Post 2313882)

.......

Here you go;http://www.offshoreonly.com/forums/s...0&postcount=14 http://www.offshoreonly.com/forums/s...8&postcount=20

JCPERF

10-22-2007 09:10 PM

YamJB on here has the 33

boating37

10-22-2007 10:10 PM

Concept 36 C/C is one of those 33 hulls,they got the mold from Apache. Great boat.

turbo2256b

10-23-2007 09:50 AM

Quote:

Originally Posted by rockstrmkr (Post 2312113)

Havent found mine to be scary. Oh at first it was overtaking large boat wakes. It would get hung up didnt want to turn out or back into it while running almost parallel. Quick fix though outward rotating props were toed in at the prop. Changed to toe out at the prop then running with the wake and crossing it was like the wake didnt exist. Its never felt as though it had a tendancy to stuff itself. I have stuffed a few boats many were good handling boats just bad circumstances.

Panther

10-23-2007 07:12 PM

http://www.printroom.com/ViewGallery...825&image_id=0

All times are GMT -5. The time now is 03:07 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page