33' Apaches
10-20-2007, 02:53 PM
#6
The BAD Guy
Platinum Member
Not sure on the cc's. I was thinking of the sport deck. Here is some good reading.
http://www.offshoreonly.com/forums/s...archid=1547688
http://www.offshoreonly.com/forums/s...archid=1547688
10-20-2007, 05:10 PM
#7
Not sure on the cc's. I was thinking of the sport deck. Here is some good reading.
http://www.offshoreonly.com/forums/s...archid=1547688
http://www.offshoreonly.com/forums/s...archid=1547688
10-20-2007, 06:20 PM
#8
Geronimo36
Gold Member
Can't remember the screen name right now but one of our memebers has a 33 with JCPERF 800's and Konrads, boat runs 90 mph.... I was docked next to it up in Patchogue Long Island, really nice boat! Owner lives upstate new york.
10-20-2007, 06:41 PM
#9
Registered
I may not get this entirely right, so feel free to correct me.
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....
10-20-2007, 08:51 PM
#10
I may not get this entirely right, so feel free to correct me.
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....
There was a narrow beam and a wide beam, a small handful of each.
The narrow beam was a little scary. If I remember correctly the first one was made for Ben's dad, and they stuffed it coming into Govmnt Cut day 1.....
