Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Merc Trans What do you think? >

Merc Trans What do you think?

Notices

Merc Trans What do you think?

Thread Tools
 
Old 11-17-2007, 06:00 PM
  #1  
Registered
Thread Starter
 
Join Date: May 2006
Location: Tuckerton, NJ
Posts: 2,168
Likes: 0
Received 0 Likes on 0 Posts
Merc Trans What do you think?

Any one using these still? Are they worth having rebuilt? Will they hold up to 450 HP Small Blocks?
GoFastSonic is offline  
Old 11-17-2007, 06:09 PM
  #2  
Registered
VIP Member
 
Join Date: Jan 2004
Location: Boca Raton, FL
Posts: 3,682
Likes: 0
Received 4 Likes on 4 Posts
Default

Back in the old days when Mercury and Ford were in bed together the MercTrans was born. Most of the guts are from the C-6 Ford hydraulic automatic transmission. It was better than the Borg Warner in three aspects:

1. It was lighter with its aluminum case.
2. The engine could be closer to the transom for better weight transfer and front of the engine accessibility.
3. It robbed less horsepower from the propeller.

I don't believe it was ever offered with big horsepower.
Edward R. Cozzi is offline  
Old 11-17-2007, 06:36 PM
  #3  
Registered
iTrader: (1)
 
Biggus's Avatar
 
Join Date: Apr 2001
Location: Naples, Maine
Posts: 6,304
Received 31 Likes on 24 Posts
Default

Cozzi, as usual is right on the money.

Years ago, I had a pair of blown smallblocks (the old Hells Banana M-666) in front of the MercTrans with zero problems. Beat the hell outta them

Also had one in front of a twin turbo Gale Banks 482 in my 24 Superboat. It didn't work well in that application....

Kurt
Biggus is offline  
Old 11-17-2007, 07:02 PM
  #4  
Registered
Platinum Member
 
Join Date: Jun 2006
Location: Lake Conroe, TX.
Posts: 14,914
Likes: 0
Received 1 Like on 1 Post
Default

They should be fine for the smallblocks. I think I have seen them on the 420 TRS set up before from the factory. (not positive on that one, you gurus probably might be able to shed a little more light)

as for Bigger power, I have heard they are not as good as the borg warner ( after it was upgraded of course)
jeff1000man is offline  
Old 11-17-2007, 08:34 PM
  #5  
Banned
 
cuda's Avatar
 
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes on 0 Posts
Default

I had the one in the Donzi rebuilt, added an extra clutch, and had the shaft clearance. Should be good to well over 500 hp I was told. Mine came stock in behind a 454/330, with a Trs. Love it.
cuda is offline  
Old 11-18-2007, 11:57 AM
  #6  
Registered
Thread Starter
 
Join Date: May 2006
Location: Tuckerton, NJ
Posts: 2,168
Likes: 0
Received 0 Likes on 0 Posts
Default Thnaks for the info

We just bought the new Race boat and the guy that used to race it had them for over 20 years"boat is a 79" but a couple of people are telling me to swith to the Borg Warners. I am trying to keep this as low budget as possible so i think just a good rebuild from Bam with the extra clutch packs will do the trick?
GoFastSonic is offline  
Old 11-18-2007, 12:09 PM
  #7  
Registered
 
Join Date: Jul 2007
Location: Austin,Texas
Posts: 2,111
Likes: 0
Received 1 Like on 1 Post
Default

The merc trannies are not the toughest things available. They can however give you good service. Borg warners will slow the boat. Partly because they move the motors forward.
Jim
MOBILEMERCMAN is offline  
Old 11-18-2007, 03:16 PM
  #8  
Registered
Thread Starter
 
Join Date: May 2006
Location: Tuckerton, NJ
Posts: 2,168
Likes: 0
Received 0 Likes on 0 Posts
Default Merc Trans

Can i expect them to last the whole season?
GoFastSonic is offline  
Old 11-18-2007, 04:20 PM
  #9  
Registered
 
Join Date: Jul 2007
Location: Austin,Texas
Posts: 2,111
Likes: 0
Received 1 Like on 1 Post
Default

Thats a tough question. I think the biggest determining factor is the touch of the throttle guy. And it is my opinion a cleaver type prop is more forgiving.
Jim
MOBILEMERCMAN is offline  
Old 11-18-2007, 04:44 PM
  #10  
Registered
Thread Starter
 
Join Date: May 2006
Location: Tuckerton, NJ
Posts: 2,168
Likes: 0
Received 0 Likes on 0 Posts
Default Merc Trans

Have a great throttle man and are running 3 blade cleavers so i guess it will be a learning experience. Thanks
GoFastSonic is offline  


Quick Reply: Merc Trans What do you think?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.