Surface drive CC's?
#1
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
Surface drive CC's?
I was going to post this on Anglersonly.com but the forum is loaded up with porn spam.
Who here has a CC with a surface drive setup?
I'm primarily interested in how clean the wake is at a 6 knot trolling speed.
Who here has a CC with a surface drive setup?
I'm primarily interested in how clean the wake is at a 6 knot trolling speed.
#2
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered
I might suggest posting this in the Nor-Tech forum, or just go buy this boat...
http://www.yachtworld.com/core/listi...currencyid=100
http://www.yachtworld.com/core/listi...currencyid=100
#7
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered
Thread Starter
Join Date: Nov 2005
Location: Millsboro, DE
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
I'll check out nor tech forum, thanks.
Yes but no more than OB's - still a PIA.
One downside I see is the engines being in the boat at the transom so you'd have a large engine hatch to deal with or motor box on a single engine app.
So to add another question has anyone used jackshafts with surface or pulse drives?
Yes but no more than OB's - still a PIA.
One downside I see is the engines being in the boat at the transom so you'd have a large engine hatch to deal with or motor box on a single engine app.
So to add another question has anyone used jackshafts with surface or pulse drives?