Kryptonite boats
#76
Registered
Join Date: Jul 2003
Location: Watkins Glen
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Kryptonite 104 on GPS
Kirk builds one hell of a boat.Best in its class.Here is a vid I took of one while we were testing.850 hp got a us a very stable 100mph rocketship.Sorry about the quality
http://www.youtube.com/watch?v=d1vgimgnmXM
http://www.youtube.com/watch?v=d1vgimgnmXM
Take care,
Don
#77
Registered
I bought Lightspeed's old Kryptonite. 800hp/598ci JC Performance gets a solid 100+mph any time I want with a 32" labbed Bravo 1.
I was disappointed with it at first with the 29" Hydromotive P-5 on it because I felt that it lifted the stern too much and made it walk all over the place, but that Bravo 1 made it a whole different boat. It runs so stable now that even my girl has run it up to 97mph with no issues.
I was disappointed with it at first with the 29" Hydromotive P-5 on it because I felt that it lifted the stern too much and made it walk all over the place, but that Bravo 1 made it a whole different boat. It runs so stable now that even my girl has run it up to 97mph with no issues.
#78
Registered
Join Date: Jul 2003
Location: Watkins Glen
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
I have a chine walk issue around 83mph, does anyone have the ITS, on there Kryptonite? if so what drives are you running. I have a -3 Imco, the Hydromotive prop was bad the Bravo is better but still not there. I have a 2002@ 104 mph and never experinced this. But the 2005 I just bought is terrible. Any advise
#80
Registered
Join Date: Jul 2003
Location: Watkins Glen
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Are you measuring your X from the center pad? Or the higher notched area of the transom just in fron of the drive? I am measuring from the center pad which is lower. I am 3.0" below the center with the ITS and a -3 Imco Extreme SC. Did you experiance any chine walk at all? Mine gets pretty rough going side to side over 83 MPH. I noticed the Hydromotive P5 is really bad, the Bravo 30 is better the bravo 28 is good but I am running too many RPM's. I think a labbed 30 would be perfict for RPM's but wonder why the 28 is more stabil. Any advise will be appreciated. thank You