|
Originally Posted by BROWNIE
(Post 2367680)
Dang it, Mindy, that is not a bell housing, it is a gimbal housing.................
You could call it a helmet I guess...... from the press release..... "All that’s required is to pull the existing Speedmaster drive units, pull the hinge pins from the SSM gimbal ring, remove the drive bellhousing and install the specially designed Konrad SSM conversion bellhousing. " |
Originally Posted by dwtinc
(Post 2367818)
Whats the cost
|
Hold on, the cost is not nearly what you would think it would be....NEW TECHNOLOGY, lot's of prop options open up due to the prop shaft change, and no longer obsolete equipment on your boat...
Miami Boat show will be the debut, please do not quote me until it is official, but somewhere in the 10K a side range...Compare that to rebuilding your broken IIIA's (if you can find the parts...) |
so then about the same as a trs conversion... should work out for boats with a #5 drive too..:cool-smiley-011:
|
Dang me, dang me, they oughta take a rope and hang me....................
|
Great job Mindi. Glad to see more reliable conversions going on. :D
Tom |
Proud to be a Konrad Dealer!!
|
Originally Posted by fast fun 2
(Post 2367911)
Proud to be a Konrad Dealer!!
More information can be found on their website, www.konradmarine.com Lot's more pictures and details coming, check back! |
Originally Posted by Panther
(Post 2367834)
Is Mercury sill producing the replacement parts for the SSM III/IIIA gimbal housings/rings? If not, do you offer replacement parts for the SSM gimbal housing?
|
Originally Posted by open72
(Post 2367881)
so then about the same as a trs conversion... should work out for boats with a #5 drive too..:cool-smiley-011:
So,actually, it's less than a trs conversion.:cool-smiley-011: |
| All times are GMT -5. The time now is 10:04 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.