Main engine loom connector - where???
 

Anyone know where I can get a 10-pin plug with pigtail? One was damaged when my engines were removed, and a whole new harness is about $600. If I can get just this part, I can splice it in. Hardin Marine lists a straight one with a square mounting flange, but I need a 90 degree one with just a raised flange.

Help?!

You can not just splice the wire?

CP is the only one that I know of that sells it and like you said, they only have the straight one. I had looked in the past for a 90* one and could never find one. If you find one, please let me know where you got it from.
You may a used one on ebay. I have seen harnesses in the past. Also try a place called the Boat Yard. They are in Marrero, La. WWW.theboatyardinc.com or 888-245-1255. Hope this helps, Eddie.

Trick Marine!!!!!

I saw a 55 gal drum full of them @ marine surplus in sarasota. Not much help if you are in Va though.

If someone doesn't mind stopping by and picking up a scrap harness for me, I'll pay up to $50. I just need to make sure the plug is OK, and the metal sockets have not been ripped out.

No. The entire metal socket (and about 1/2" of wire...) got pulled completely out of the molded connector when it got unplugged from the boat harness.

I have the pig tail from my 7.4l 454 that i am not using. Let me know if this will work for you.

I need the straight connector half that is mount to the boat. (The half that has the male pins) if anyone has it.

Thanks

I got one on Ebay a few months ago, Both the one on the motor and the complete harness to the dash, You might look
there.
Mike J.

Can you check the pictures above, and see if it matches?

Can't see the pics from my work computer:(
I'LL shoot you a PM

this is what i have.sorry for the sh itty pics.

Give Bill Livingston a call at Custom Wiring Harnesses. He will be able to take care of you.#813-817-0577 Dave

Wardey - You are the man. Not only did Bill have the part, he was the guy who built the harnesses in the first place! Gotta love OSO.

Thanks, everybody!

Bill is as good as they come. Dave