which engine would you buy?
#12
VIP Member
VIP Member
All other posts are good answers, but this is the best answer.
#14
arneson-industries.com
Offshoreonly Advertiser
FYI, new a Merc 525 is only 25K ish.
#16
Registered
Thread Starter
Join Date: Dec 2007
Location: jackson hole wyoming
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
pfaffs 725 efi anybody have one
Any body out there have Pfaffs new 598 ci efi 725 hp? any comments on it?
Last edited by cbudge; 12-26-2007 at 08:11 PM.
#17
arneson-industries.com
Offshoreonly Advertiser
That's right, but at the OEM price or the racer price, they are far less. Point is the used prices quoted are not a good deal.
Let's not even go into the breaking the packages apart conversation. There are more ways to skin that cat then there are opinons.
Let's not even go into the breaking the packages apart conversation. There are more ways to skin that cat then there are opinons.
#18
Registered
Join Date: Feb 2007
Location: Ohio / Florida
Posts: 1,136
Likes: 0
Received 0 Likes
on
0 Posts
Hey Lost. If memory serves correct (you have been MIA for a while), you have the beautiful blue 39 (still my g/f's favorite). Saw it at the Fort Myers Poker Run this year. Correct me if I'm wrong, you have 600's with nxt's? Your package seems very reliable. But why 700's for a 35'.? Dat's a bit of juice for a 35'! BTW - are you comming back down this year? If you don't mind, I'd like to get some picks of my g/f in her matching blue string bikini on the deck of your Cig.
#19
Platinum Member
Platinum Member
In that HP range I would have to go with Mercs and their matched drive.
Engines are efficient, under rated and will be on snooze compared to any 700hp N/A mill.
I would think that resale value will more than make up for the extra up front cost's.
Good Luck!
Engines are efficient, under rated and will be on snooze compared to any 700hp N/A mill.
I would think that resale value will more than make up for the extra up front cost's.
Good Luck!
#20
Is that priced without the drive? I would assume it is