Anyone add a kill switch to their boat?
01-13-2002, 12:23 AM
#1
Registered
Thread Starter
Join Date: Jul 2001
Location: Twin Lake, Michigan
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
Anyone add a kill switch to their boat?
Just wondering if anyone has done this? Is there a kit that I could buy or is this something that has to be pieced together?
Thanks in advance for the info.
Thanks in advance for the info.
01-13-2002, 12:25 AM
#2
Charter Member #232
Charter Member
Merc makes a good kit that you can get at any dealer that comes with very good directions as to the proper hook up.
You should have one for each motor but you can just use one if you want to, but it is recommended that you use one for each.
Jon
You should have one for each motor but you can just use one if you want to, but it is recommended that you use one for each.
Jon
__________________
Put your best foot forward!
Put your best foot forward!
My boat would sink with twins back there 
01-13-2002, 02:34 AM
#6
Gone Fishin'
Charter Member
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
Todd, I bought one for the Foul last spring for $20 at Wolfs Marine in Benton Harbor (their annual spring sale, free food, good prices, etc...). Never installed it!!! Need to do it if I want to run in the shootout at LOTO this summer (required). You can get them at just about any dealer. In your boat, I would DEFINITEY recomend one!!!!
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
01-13-2002, 03:34 AM
#7
OSO Content Provider
Commercial Member
Yeah, I have one. It's sort of a must have in my boat. 
