From Bravo to Arneson on a Cat-Who's done it?
#1
Registered
Thread Starter
From Bravo to Arneson on a Cat-Who's done it?
Thinking about doing something with the drives on my 2007 36Spectre and wanted to hear from anyone that has actually done this conversion on their twin engine cat. Sorry guys, not looking for any "I think's" or "Call Rik at Arneson" type feedback.
I want to know what road blocks were encountered during installation, what holes had to be filled, how your boat ran before and after, etc.
Thanks in advance for those in the know sharing!
I want to know what road blocks were encountered during installation, what holes had to be filled, how your boat ran before and after, etc.
Thanks in advance for those in the know sharing!
#5
Registered
Thread Starter
mikebrls,
Exactly NOT what I was looking for. Again, looking for someone that has ACTUALLY DONE THE CONVERSION to share some information.
Audiofn,
Thanks, I have done searches and am still looking for more details, less speculation, and perhaps some pictures of work in progress and the results after the change.
Sonny
Exactly NOT what I was looking for. Again, looking for someone that has ACTUALLY DONE THE CONVERSION to share some information.
Audiofn,
Thanks, I have done searches and am still looking for more details, less speculation, and perhaps some pictures of work in progress and the results after the change.
Sonny
#9
Registered
Join Date: Oct 2000
Location: Toms River, NJ
Posts: 2,737
Likes: 0
Received 0 Likes
on
0 Posts
Arneson STINKS on getting the parts (sub contracted) and tech support is like "well try this and if that doesn't work try this"
Rick Wimp is a gentleman but he is at the mercey of Twin Disc. We did it on a 38 Formula and what was supposed to take a few months turned into 8 months!
STAY AWAY unless you buy a new boat with Arnesons from the factory.
Rick Wimp is a gentleman but he is at the mercey of Twin Disc. We did it on a 38 Formula and what was supposed to take a few months turned into 8 months!
STAY AWAY unless you buy a new boat with Arnesons from the factory.
#10
Platinum Member
Platinum Member
Sonny,
A friend of mine had a 36 Spectre and when he looked at putting Arnesons on he was told he had to fill the notch in the transom to make it work. Needless to say he didn't put them on.
A friend of mine had a 36 Spectre and when he looked at putting Arnesons on he was told he had to fill the notch in the transom to make it work. Needless to say he didn't put them on.