46 Skater does 190 !!!!!!! Congrats Byrdman !!!!
#54
Registered
Congratulations Gents and Doreen!!!!!!!!!!!!!!
Skater 46
Length: 45’ 7"
Beam: 12’
Height To Top of Canopies: 6’10”
Weight: 5000 Lbs.
Fuel Capacity: 400-1000 Gallons
Tunnel Width: 66”
Tunnel Height (Front): 42”
Tunnel Height (Read): 26”
Sponson Deadrise: 16°
If you want to cruise all day at 100 MPH in a boat that feels like a stretch limo, the Skater 46 Race Pleasure more than delivers with the smooth ride that comes from years of dominating the offshore racing and poker run circuits.
Engine Configurations Estimated Speeds*
(2x) 1075 H.P. Engines with #6 Drives 145 MPH+
(2x) 1100 H.P. Engines with #6 Drives 145 MPH+
(2x) 1300 H.P. Engines with #6 Drives 170 MPH+
Arneson drives available
Download Specifications
*Speeds are only estimates. Your performance may vary due to water conditions, fuel and passenger load and other factors. Custom modifications can be accomplished for an additional charge.
Skater 46
Length: 45’ 7"
Beam: 12’
Height To Top of Canopies: 6’10”
Weight: 5000 Lbs.
Fuel Capacity: 400-1000 Gallons
Tunnel Width: 66”
Tunnel Height (Front): 42”
Tunnel Height (Read): 26”
Sponson Deadrise: 16°
If you want to cruise all day at 100 MPH in a boat that feels like a stretch limo, the Skater 46 Race Pleasure more than delivers with the smooth ride that comes from years of dominating the offshore racing and poker run circuits.
Engine Configurations Estimated Speeds*
(2x) 1075 H.P. Engines with #6 Drives 145 MPH+
(2x) 1100 H.P. Engines with #6 Drives 145 MPH+
(2x) 1300 H.P. Engines with #6 Drives 170 MPH+
Arneson drives available
Download Specifications
*Speeds are only estimates. Your performance may vary due to water conditions, fuel and passenger load and other factors. Custom modifications can be accomplished for an additional charge.
#55
VIP Member
VIP Member
#56
Registered
Congratulations guys. I have a pretty good idea of what it takes to accomplish what you have. It took me a year of testing and tweaking to get one in the 170's safely(or as safe as you can be in an open cockpit boat over 170) and consistently. Hopefully you can hit 200 with it. Great job on the power JC. Again, congrats and be safe. Eddie
#59
Registered
Platinum Member
For all those involved .............. I want to say thanks alot .......... You know who you are ......... This boat was built entirely from knowledge from this website........... I wanna thank BIG DADDY Bill Pyburn "Gatorone" for all his help with running the boat & use of his facilities.......... Lucididee will post mad pictures and video when we return
#60
Registered
This was a real big project going on for 3 years and for Byrdman being a "just a plumber" from south Jersey, he came up with this whole vision. Many of the top people in the marine performance industry said it couldn't be done with this type motor, setup & boat. I just helped fine tune his combination along with Richie Zul and steered him to the best boat rigger, John Pompi (Callan turbine race boat), to complete this project, and he has seen it through to the very end. This project was a success. We are still in the testing and tuning stages of this boat, we have Johnny Tomlinson coming tommorrow to fine tune the final stages of this project.