Smart Craft and GPS
#2
Rigging now,....
Yes sir,
I am rigging my boat as we speak, and I am using the vessel view with the northstar 550. When I get it all together I will let you know. Eddie young is doing an excellent job figuring out what plugs in where and so on. We are sort of learning as we go and have learned that Merc is not doing much as far as training their dealers. I just had to purchase 6 more sensors/plugs yesterday.
So hopefully I will have some good news in a week or so.
I am rigging my boat as we speak, and I am using the vessel view with the northstar 550. When I get it all together I will let you know. Eddie young is doing an excellent job figuring out what plugs in where and so on. We are sort of learning as we go and have learned that Merc is not doing much as far as training their dealers. I just had to purchase 6 more sensors/plugs yesterday.
So hopefully I will have some good news in a week or so.
#4
Registered
Join Date: Aug 2003
Location: Pompano Beach Fl
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
I have done plenty of them I find the gauges a little small to read at speed. Wont show you any of the faults . Its real simple hook up any questions I could probably talk you through it
#5
chuckbeecher
Platinum Member
Join Date: Jun 2001
Location: Anywhere from the Laguna Madre to JAX and beyond
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
Showed how in-accurrate the high doller/calibrated Livorsi guages(tachs) are OFF!!
Will be the most help at dialing-in boat with correct props now.
Will be the most help at dialing-in boat with correct props now.
Last edited by chuckbeecher; 02-02-2008 at 04:44 PM.
#6
Registered
Yes sir,
I am rigging my boat as we speak, and I am using the vessel view with the northstar 550. When I get it all together I will let you know. Eddie young is doing an excellent job figuring out what plugs in where and so on. We are sort of learning as we go and have learned that Merc is not doing much as far as training their dealers. I just had to purchase 6 more sensors/plugs yesterday.
So hopefully I will have some good news in a week or so.
I am rigging my boat as we speak, and I am using the vessel view with the northstar 550. When I get it all together I will let you know. Eddie young is doing an excellent job figuring out what plugs in where and so on. We are sort of learning as we go and have learned that Merc is not doing much as far as training their dealers. I just had to purchase 6 more sensors/plugs yesterday.
So hopefully I will have some good news in a week or so.
Tell Eddie if he needs any assistance to call me on the cell.
Pat
Thread
Thread Starter
Forum
Replies
Last Post
Nauti Kitty
General Boating Discussion
0
06-02-2002 11:40 PM
kook
General Boating Discussion
1
05-11-2002 10:32 AM