Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   GLM Exhaust Manifolds, anyone used them? (https://www.offshoreonly.com/forums/general-boating-discussion/179148-glm-exhaust-manifolds-anyone-used-them.html)

rchevelle71 02-06-2008 01:15 PM
Originally Posted by Steve H (Post 2435350)
I bought some a couple of years ago. They were OK for the money. They were missing some of the riser bolts too. The bolts that came with it were ugly anyway so I bought some that were decent looking. I hosed them with some good shiney paint to help camo the ugly casting. Been working fine!

Steve
We are going to use Stainless anyway, dont need his bolts.

mama tryed 02-06-2008 06:44 PM
The power of OSO shines through again!! Thanks,,, I'll pass along all this info to my bud!!

fund razor 02-07-2008 09:07 AM
I ended up using stainless too. And Copper Spray a Gasket made up for the lame casting.
All in all they were ok.
Didn't really enjoy my interaction with Dennis. It was a bummer because I used to look up to him and had read his book.


All times are GMT -5. The time now is 11:48 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.