Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Arneson ASD6 to ASD7 conversion (https://www.offshoreonly.com/forums/general-boating-discussion/180037-arneson-asd6-asd7-conversion.html)

littledcsrodshop 02-22-2008 12:11 PM

Those ASD's look awsome hanging off the back esp. on the boxes...

Eddie , I sent you an Email last night take a look when you get a chance.. Thanks , Scott

Young Performance 02-22-2008 01:08 PM


Originally Posted by Jassman (Post 2455448)
The new 39 Rocket should take the power MUCH better.
Eddie


You'll never know unless you get building one with the same power:cool-smiley-011::D[/QUOTE]


All you have to do is write a check?:D:D:D

You never know what Eric may do. He is supposed to go to Hustler and drive one. He was waiting for the Miami show to end and everything to settle down. He is supposed to go soon. If he likes it, who knows, he may buy one. If he does, I think he may take the motors out of the 388 and put them in the new one. Time will tell. If he gets a wild hair, who knows what he may do.
Eddie

Young Performance 02-22-2008 01:09 PM


Originally Posted by littledcsrodshop (Post 2455869)
Eddie , I sent you an Email last night take a look when you get a chance.. Thanks , Scott

Just send one back at you.

littledcsrodshop 02-22-2008 05:21 PM

Thanks Eddie !! & I will quit jacking this thread now..:D

CAFormula1 02-23-2008 01:22 PM

How is the boat getting on plane? Gear ratio?

KL

Young Performance 02-23-2008 04:31 PM

The boat has no problem getting on plane. We leave the drives neutral and give it just a little tab and it hops right up. We don't do a lot of triming of the drives, like a bravo. They stay pretty much at neutral trim all the time.
The boat has a 1.3 gear ratio.
Eddie


All times are GMT -5. The time now is 03:55 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.