Konrad outdrives
02-22-2008, 07:20 AM
#11
Registered
Thread Starter
Join Date: Nov 2000
Location: Rock Hill S.C.
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
The boat is completely apart now as i am doing a total rebuild fresh gelcoat. The trs stuff is gone. My receipt says a righthand drive but with the dealer out of business now. The shipping i agreed to and was happy that i would not have to spend any money on any other parts to make it a right hand. I feel that Konrad is doing right by me.
02-22-2008, 07:23 AM
#12
Diamond Member #001
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Right hand rotation is normally used on singles to counteract the weight of the driver on the right side of the boat. If your boat is perfectly balanced side-to-side as you usually run it, then drive roatation should have no physical effect. On the other hand, if you always run with some "generously proportioned" guests on the left side of the boat (or keep your oversize cooler over there), left hand rotation would be better.
Left hand props will probably always be harder to find, though...
Left hand props will probably always be harder to find, though...
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
02-22-2008, 07:26 AM
#13
Sorry for the delay in reply, been on the road for the past few days.
Typically we try to set up single engine boats with a left hand drive as the left hand unit is a bit stronger than a right hand due to the placement of the lower drive gear. I suggest trying it to see how the boat runs with a left hand configuration.
If you are not happy with the performance, shoot me an email and I'll get it taken care of asap.
[email protected]
Typically we try to set up single engine boats with a left hand drive as the left hand unit is a bit stronger than a right hand due to the placement of the lower drive gear. I suggest trying it to see how the boat runs with a left hand configuration.
If you are not happy with the performance, shoot me an email and I'll get it taken care of asap.
[email protected]
02-22-2008, 08:36 AM
#15
02-22-2008, 11:34 AM
#16
Lakeside Restorations.com
Commercial Member
I agree Kurt & the Konrad crew have always been excellent to deal with on our end.. Some other companies could learn a lot from them IMO.. 
Jamie / Lakeside
Jamie / Lakeside
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
02-23-2008, 08:30 AM
#17
Registered
Thread Starter
Join Date: Nov 2000
Location: Rock Hill S.C.
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Kurt thanks you for the information. I'll be putting the boat back together over the next four months and i'll let you know the outcome after i run the boat. Thanks Harry
02-23-2008, 11:23 AM
#19
Registered
Join Date: Feb 2001
Location: charlotte nc.
Posts: 1,849
Likes: 0
Received 0 Likes
on
0 Posts
