Non Slip Mats
#1
Platinum Member
Platinum Member
Thread Starter
Non Slip Mats
Does anyone know of a non-slip mat or material that can be laid on the surface of a boat to make it safe for walking?
Due to the slope of the boat it's pretty treacherous trying to go from one boat to another while tied up with other boats...
I'm looking for something that won't slip when stepped on and will not harm the painted surface of the boat..
Due to the slope of the boat it's pretty treacherous trying to go from one boat to another while tied up with other boats...
I'm looking for something that won't slip when stepped on and will not harm the painted surface of the boat..
#5
Registered
Join Date: May 2005
Location: Austin, Texas
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
I have not tried it but I would think that the tool box tray liners would probably work well. It is soft, padded. and designed to be non-slip. They sell it a Wal-mart, Sears or just about anywhere. It's worth a try anyway!
#6
Guest
Posts: n/a
This is what I use. Comes in a roll. Put it across my deck when rafting at lunch stops on Poker Runs. Works perfectly
#7
Platinum Member
Platinum Member
I had Nortech make a gunnel pad so that when boarding people could step on this as to not ruin the paint. Its backed with a non skid material, and matches one of the color vinyls of my interior. Rolls up easy, and dries out quickly if gets wet. Im going to get some snaps put in there as well. When I go out today I will take a few pics. Jeff
#9
VIP Member
VIP Member
We were rafted up to a boat at Gilberts on the FPC run a couple of weeks ago that had the tool box liner across his bow and it seemed to work real well. I'm going to grab a roll the next time I go to Lowes.
#10
Registered
Ok I have an Idea (very expensive but still an idea)
We have been taking photos of custom cars then photoshoping a cool backround to them to create and unique look for someones car to plaque and hang on a wall
Recently we did a floor mat 4' x 3' for a customer with his car
we had already photoshopped his car for plaquing so the art cost were paid for and the finished plaque turned out great
The Mat is made of rubber and wont slip and would be something cool to have onboard with a picture of your boat either with or without the custom backround
I am taking it with me to the Detroit World of wheels show (We have a booth there) to display it before it goes off to the customer
let me take a picture a minute and i will post what it looks like I am in the shop today anyway
We have been taking photos of custom cars then photoshoping a cool backround to them to create and unique look for someones car to plaque and hang on a wall
Recently we did a floor mat 4' x 3' for a customer with his car
we had already photoshopped his car for plaquing so the art cost were paid for and the finished plaque turned out great
The Mat is made of rubber and wont slip and would be something cool to have onboard with a picture of your boat either with or without the custom backround
I am taking it with me to the Detroit World of wheels show (We have a booth there) to display it before it goes off to the customer
let me take a picture a minute and i will post what it looks like I am in the shop today anyway