Pic's and Logos
 

How do you apply a pic or logo by your user name when you post an item?:confused:

Go to BB profile, click on options and scroll down to Change avatar.

Larry

Thanks Larry. How do I down size a pic to 50 by 50 pix's to get it to fit the avatar?

I found the pic I wanted, right clicked it and opened it with "imaging"... Right click the picture------> Properties. Click "Size"... choosing a smaller size will crop from the left and bottom of the pic... but there is an icon on the toolbar up top that will let you rotate the image so you can clip all sides using the size parameters. I saved it

Now to downsize the picture, I right clicked what I saved and this time chose --Open With -----> "Microsoft Paint", In paint, click on "Image" and select "sketch/skew" and input values in for Horizontal and Vertical to get a smaller pic. Save that... and it should upload if what you did is small enough. ---John

BTW- there has to be an easier way LOL :D

Hey Thank's John............ I'll try it in the am.

Testing

This is just a Test...to see if mine worked

By the way, I found this at www.clipart.com , if any of you guys were interested, you can also crop it down to 50 x 50 to fit,when searching there are a lot of pop-up advertisings.



is that better for you!

Nasdboy......Let me make this simple. I dont think we need this kinda crap on the Offshore Only.com site. It makes the rest of the folks look like scum, and only supports those occasions where this website is looked at being non-boating. Lets not ruin it for everone.

how do you get that cool little pic beside your name?

just testing again