Mark, are you sure this number is correct? I called it twice, and there was no outgoing message. I left a voicemail and never heard back either.

Michael

Exactly ......the gallons of polish showed up but no SHIRTS :p WTF

Would the polish work well to keep the outdrives shining? I have been using Corrosion Block and it just doesn't shine for long after the boats been in the water a couple of times.

Donny...

What do you recommend for the drives?

I use it on everything, bezels, glass on the bezels, grab bars, paint, engine parts, drives..etc..the stuff works great..even though the guy's a little strange:party-smiley-004::ernaehrung004:

Thanks Jassman. I guess I should just try it, however, figured I'd see if anyone knew of any great products for the drives. I do really like the Leverage polish for the deck... put it on 2 months ago and there's still a shine. I've been spraying the drives with corrosion block but the shine only lasts for a few days. I'll see what the leverage does.

OK. I dug up this old thread to get feedback after all these years. Are things still great with leverage? Any fail stories or issues?

I'm thinking of going the leverage route but wanted to hear how it has done for those who have used it over the long haul.
TIA

I'm a little slow lately on polishing, but it's worked well for me.

Going on 5 years and still shines and cleans up great.

I still use it. I give the boat a good waxing at the beginning of the season and then use Leverage three more times threw out the season.