Help, need a computer for a HP500EFi ASAP !!
#1
Registered
Thread Starter
Join Date: Dec 2003
Location: Ottawa, Ontario,Canada baby!
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Help, need a computer for a HP500EFi ASAP !!
Mine is aparently fried, anyone know of a used computer for sale? We have the MEFI burn system so I don't care if it has been recalibrated different from stock. We will calibrate it for my Whipple.
Any help is apreciated !!!
TIA.
Jeff Tomlinson.
Any help is apreciated !!!
TIA.
Jeff Tomlinson.
#3
Registered
Thread Starter
Join Date: Dec 2003
Location: Ottawa, Ontario,Canada baby!
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Good idea enticer, better find out how this happen before I bolt up another . I am going to speak to my builder more, and probably call buddy at MEFIburn and ask him what could have caused this.
#4
Registered
Check all of your wiring and connections really good. It is a VERY rare occasion that one of those computers take a dump. I have only run across 2 that have been no good, and I have dealt with a bunch of them over the last dozen or so years. Check the grounds especially well. Good luck.
Eddie.
Eddie.
#5
Registered
Thread Starter
Join Date: Dec 2003
Location: Ottawa, Ontario,Canada baby!
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
Eddie, can I have my builder give you a call next week? This setup is new to him. His efi guy has done very many, but none with a Whipple. I found it odd that the computer is fried too. I will pay for your time on the phone with him. I'm not looking for free help. Just experineced help. This engine isn't keeping the air fuel ratio even. It is different at same rpms each pull he tries to make. Hard to explain in print.
Let me know if you are available for my guy to call you.
TIA.
Let me know if you are available for my guy to call you.
TIA.
#10
Registered
Jeff,
No problem, call anytime. I don't want any money for a phone call or advice. I would be glad to help you out if I can. Shop# 615-216-7449 or cell # 504-416-3607
Eddie
No problem, call anytime. I don't want any money for a phone call or advice. I would be glad to help you out if I can. Shop# 615-216-7449 or cell # 504-416-3607
Eddie