IMCO SCX and SCT
Does anyone have any new information or recent experience with either of these two drives?
|
Just put a twin set of SCX on the New Ultra 344sc and ran them this last weekend.
|
Thanks for your response.
I talked to John. |
Originally Posted by Bad Ass Industrial
(Post 2545963)
Just put a twin set of SCX on the New Ultra 344sc and ran them this last weekend.
|
What motors? How'd they run compared to what you had before?
|
I'd like to here more about the scx and the power in front of it.
|
Originally Posted by Sonny Spectre 30
(Post 2548733)
What motors? How'd they run compared to what you had before?
|
I'm looking to put a set on my 2007 36' Spectre with 625 Ilmor's. Thinking about going up in drive height -2" and getting the big shaft (#6 props). Any suggestions based on your experience with these SCX drives?
|
Originally Posted by Sonny Spectre 30
(Post 2549850)
I'm looking to put a set on my 2007 36' Spectre with 625 Ilmor's. Thinking about going up in drive height -2" and getting the big shaft (#6 props). Any suggestions based on your experience with these SCX drives?
|
We're still doing our testing. We have only had the boat out one weekend so far and the conditions were less than ideal for testing. I will be doing a lot more testing this Thursday and Friday in California and then Saturday and Sunday in Havasu. I will let you know how everything goes next week. The boat is a 2009 Ultra 344 SC (34'4",10'4")with Ilmor 710s, IMCO SCX drives with standoff boxes, 1.34 gear ratio, 32 labbed Maximus props. So far I am very impressed with the IMCO SCX drives. This is the first boat built of this model, so I can't give you a comparison to any other engine and drive combos.
|
All times are GMT -5. The time now is 07:47 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.