Paging Steve Snider
 

Steve whats your price for the Emi cam driven water pump? and the timing cover for a Mark 4 454? I think I need them.......too cool !!!

Still waiting......Steve can you cut me a deal on the WPM steering if I buy two sets? a buddy is looking for a set-up too!
Don

Hi Dyno Steve is in Phoenix right now looking at a 92 cigarette,he will be calling me tonight i will let him know that you are looking for him.

Dyno, I forgot to tell you that Waterfoul dropped off your prop early this week at my house. Sorry. P.S. You really like those cam-driven pumps don't you? If you buy them can you just take the impeller out of the existing seawater pumps and use the rest to drive the fuel pumps, or do you need the water thru the assembly to cool the fuel pump drive?

Dave I dont know about the fuel pumps.....a good question for Steve.

Dyno, Sorry I wasn't available - cam driven H2O pump from EMI #105-10 lists at $235. -your price is $211. Front cover #104-02 lists at $125.-your price is $112. Concerning a price on hydraulic steering. What WPM system did you want a price on? Full hydraulic, hydraulic assist, one ram or two rams. Singe Bravo or twin? Let me know. Thanks, Steve [email protected]

Steve my buddy and I both want hydraulic assist for twin bravo's....twin ram...

Steve one more question.....if I put on the cam driven pumps what do most people do about there belt driven fuel pumps?just switch it all over to electric?

Dyno, Twin ram hydraulic ( EMI part # PSS-101) assist for Bravo lists at $2475. if you buy 2 sets your price is $2225. plus UPS charges. Visa or mastercard -no C.O.D. shipments- or bank check sent to me in advance. Your choice. In regard to the H2O pump being run off the cam . I would replace fuel pump that runs off old water pump with electric one. Thanks, Steve

Steve will wpm steering work with Imco drive showers?or will I have to use Imco's steering???I like the c-brackets on the Wpm but if it interferes with my showers it wont work....what is your price on the Imco shorty housing with the input shaft?if I'm asking to many prices I appologize post your # at the shop and I'll call you there.
Thanks Don

How much more would full hydraulic be?

Dyno, The Imco drive shower will work- the hose will extend around the wing plate. Imco shorty cases (bare) list at $1855. your price is $1670. complete Imco shorty lowers (satin) list at $3268. your price is $2941. Hope this helps you out, Steve 815-654-2838

Crazyhorse, Full hydraulic part # PSS-113 lists at $3600. in addition to the other price quote. Your price is $3240. this includes all necessary hoses, steering helm, wheel, and wheel hub. Thanks, Steve 815-654-2838

Thanks Steve.

That over doubles the price of the complete install....aint worth that to me.....what do you think Dave?

Dyno and Crazyhorse, I checked Imco's prices for dual ram, single drive, full hydraulic, 5 bolt end cap, tilt helm, wheel, hoses, etc, and got a list price of $3632. I don't know why the WPM system is priced like that in Eddie Marine's catalog. I can sell the Imco system to you for $3406. plus UPS charges. Mastercard or visa accepted. I run this set up on my 105 mph Eliminator and really like it. Hope this helps you guys out. Later, Steve

Dyno, I've been told that the full hydraulic setup provides rock-solid handling, taking out the play that a cable setup still has when coupled with external hydraulics. I'll find out first-hand how good the full hydraulic setup is when I run Phil's new boat this spring.