Notices

Paging Steve Snider

Thread Tools
 
Old 02-21-2002, 01:19 PM
  #1  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default Paging Steve Snider

Steve whats your price for the Emi cam driven water pump? and the timing cover for a Mark 4 454? I think I need them.......too cool !!!
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Old 02-23-2002, 02:03 PM
  #2  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Still waiting......Steve can you cut me a deal on the WPM steering if I buy two sets? a buddy is looking for a set-up too!
Don
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Old 02-23-2002, 05:01 PM
  #3  
Registered
 
Join Date: Jun 2001
Location: ROCKFORD ILL
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi Dyno Steve is in Phoenix right now looking at a 92 cigarette,he will be calling me tonight i will let him know that you are looking for him.
BAD HTM SR 24 is offline  
Old 02-23-2002, 08:38 PM
  #4  
Registered
 
Crazyhorse's Avatar
 
Join Date: Jan 2001
Location: Holland MI
Posts: 3,140
Likes: 0
Received 0 Likes on 0 Posts
Default

Dyno, I forgot to tell you that Waterfoul dropped off your prop early this week at my house. Sorry. P.S. You really like those cam-driven pumps don't you? If you buy them can you just take the impeller out of the existing seawater pumps and use the rest to drive the fuel pumps, or do you need the water thru the assembly to cool the fuel pump drive?

Last edited by Crazyhorse; 02-23-2002 at 08:42 PM.
Crazyhorse is offline  
Old 02-25-2002, 12:11 PM
  #5  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Dave I dont know about the fuel pumps.....a good question for Steve.
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Old 02-25-2002, 06:40 PM
  #6  
Registered
 
Steve Snider's Avatar
 
Join Date: Nov 2001
Location: Pompano Beach, Florida
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Default

Dyno, Sorry I wasn't available - cam driven H2O pump from EMI #105-10 lists at $235. -your price is $211. Front cover #104-02 lists at $125.-your price is $112. Concerning a price on hydraulic steering. What WPM system did you want a price on? Full hydraulic, hydraulic assist, one ram or two rams. Singe Bravo or twin? Let me know. Thanks, Steve [email protected]
Steve Snider is offline  
Old 02-25-2002, 09:46 PM
  #7  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Steve my buddy and I both want hydraulic assist for twin bravo's....twin ram...
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Old 02-26-2002, 09:46 AM
  #8  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Steve one more question.....if I put on the cam driven pumps what do most people do about there belt driven fuel pumps?just switch it all over to electric?
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  
Old 02-26-2002, 04:14 PM
  #9  
Registered
 
Steve Snider's Avatar
 
Join Date: Nov 2001
Location: Pompano Beach, Florida
Posts: 116
Likes: 0
Received 0 Likes on 0 Posts
Default

Dyno, Twin ram hydraulic ( EMI part # PSS-101) assist for Bravo lists at $2475. if you buy 2 sets your price is $2225. plus UPS charges. Visa or mastercard -no C.O.D. shipments- or bank check sent to me in advance. Your choice. In regard to the H2O pump being run off the cam . I would replace fuel pump that runs off old water pump with electric one. Thanks, Steve
Steve Snider is offline  
Old 02-28-2002, 12:30 PM
  #10  
Charter Member #655
Charter Member
Thread Starter
 
dyno's Avatar
 
Join Date: Dec 2000
Location: Holland, Michigan
Posts: 4,939
Likes: 0
Received 1 Like on 1 Post
Default

Steve will wpm steering work with Imco drive showers?or will I have to use Imco's steering???I like the c-brackets on the Wpm but if it interferes with my showers it wont work....what is your price on the Imco shorty housing with the input shaft?if I'm asking to many prices I appologize post your # at the shop and I'll call you there.
Thanks Don
__________________
If your boat has a sail do you ride a horse to the ramp?
dyno is offline  


Quick Reply: Paging Steve Snider


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.