Offshoreonly.com - Need an arch for MV Scarab 38 kv '87

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Need an arch for MV Scarab 38 kv '87 (https://www.offshoreonly.com/forums/general-boating-discussion/188100-need-arch-mv-scarab-38-kv-87-a.html)

Sebastian

06-07-2008 04:21 PM

Quote:

Originally Posted by cig1988 (Post 2581666)

Would an arch off an '87 Wellcraft Excallibur work? A friend of mine definetly has no nee for it. Located on Long Island. PM your phone number to me.

I have no idea about the measurements. Please see my comments above. Maybe it might work.. thanks, cheers, seb

glassdave

06-07-2008 05:29 PM

the distance between mounting holes on the factory arch for a flat deck Scarab is 75 inches but you actually have an inch or two plus or minus to play with.

cig1988

06-08-2008 05:12 AM

Quote:

Originally Posted by glassdave (Post 2583218)

the distance between mounting holes on the factory arch for a flat deck Scarab is 75 inches but you actually have an inch or two plus or minus to play with.

Dave
Would an arch from a '87 excalibur fit his needs?

ultimate cat

06-08-2008 07:43 AM

have one from a 86 chris craft scropion.. will fit the scarab .. will let go for 1000.00 813-417-6424 thanks nick

All times are GMT -5. The time now is 06:58 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page