29' scarab
I have a 29' scarab and need to replace the plastic vents on the back, I have not had any luck finding any, can someone help.
|
There was a thread on this in the scarab section. I would do a search there and see if its still there. I even beleive someone made some out of billet aluminum to be able take more of a beating.
Good luck! |
I took mine plastic vents to a machine shop and they cut me new ones out of 1/4 inch aluminum they made them flat but they look just as good to make them like the plastic ones it will cost about $1500 the flat ones were only $150 they cut them with a water jet
|
I epoxied mine back into shape. A couple bucks worth of west resin and a lot of elbow grease sanding and shaping. I reinforced the ribs from behind with some threaded rod and woven mat I had in the junk pile. 2 years later they still look like new. The epoxy will stick to the plastic very well , don't use poly resin !!!
|
All times are GMT -5. The time now is 06:42 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.