imco scx, who is using one?
#4
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
Me too. According to imco there are 50+ of them out there. I have a hard time believing that there are that many out there and no one on here has any. I have also heard that there are substantial speed losses due to the size of the gear case unless you are running a very high x dimension. I wish somebody would let the cat out of the bag. I have a conventional bottom deep V that just turned the motors up to 1000+ so I have to figure something out and I was hoping that the scx would be an option.
#5
Registered
Thread Starter
Me too. According to imco there are 50+ of them out there. I have a hard time believing that there are that many out there and no one on here has any. I have also heard that there are substantial speed losses due to the size of the gear case unless you are running a very high x dimension. I wish somebody would let the cat out of the bag. I have a conventional bottom deep V that just turned the motors up to 1000+ so I have to figure something out and I was hoping that the scx would be an option.
I heard the loss was around 2mph . I think JC perf. said that?
#7
Registered
VIP Member
Join Date: Jul 2003
Location: Mt Juliet, TN
Posts: 2,159
Likes: 0
Received 0 Likes
on
0 Posts
I have heard alot more than that on deeper x's. If that is the case....I gotta turn the motors up to the point that I am tearing up scx's just like bravo's and out $40K+. I can build alot of xr's for that coin!
#8
Registered
Join Date: Jun 2007
Location: Denham Springs La.
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts