brian valery

I have KIEKHAEFER throttle control for a single, but the paint on the base is chipping. Do they make powder coated covers for the base of the controls? I recall seeing, when Trick was around, covers for the base of the throttle controls...Any info is helpful.
thanks

sleek1

Good luck, I'm still trying to find a set of anodes for my K-tabs. The smaller ones that mount vertically on the K-tab mount/transom.

brian valery

Try BAM Marine they might have something like that.

Sydwayz

iTrader: (1)

I don't think I've ever seen a cover specifically for the Kiekhaefer controls.

That being said, I know Livorsi offers them for their own throttles. I don't know if they will work over Kiekhaefer controls.

http://www.livorsi.com/catalog/controls_accessories.htm

You might consider a winter project of just pulling your original controls apart and having them PC'd or painted. There are a lot of parts to them once you pull them apart, but its not difficult to put back together if you take your time.

Sydwayz

iTrader: (1)

www.bammarine.com will have them.

sleek1

Thanks guys, I found it on BAM.