Face It

Well we been working on this SKATER 32' at Face It Boat Reconditioning, Motors came out, interior came out new color with imbrodery going in, fiberglassed all the holes in, dash also, dash lookes cool with no holes, scoops for the motors, new carpet, body work---- sanded/blocked--sanded/blocked--sanded/blocked--- my fingers are bleeding. Going new 2-part apoxy on sides, top and back. Gelcoat on bottom, this boat will be ( FAST ) Can't tell you what motors, going in. Were shooting the sides this Sat, then I get to sand/block/sand/block/buff. Top Next week then shoot, sand/block/sand/block/buff. I'm going home. Talk tomorrow.

ViciousOne

Sound's like you do alot of the same kinda stuff that we do!! Play's hell on the old finger tip's don't it!!

Ryan Beckley

It's really a shame that you are chaning the AGITATOR that much, it will never run the same. That was one of the best balanced boats of all time, sometimes you should leave well enough alone. I hope the drives hold up with the blower motors because #4 drives are tough to get parts for. Just my.02

merlin540

well ryan the boat needed a facelift and that just the way it is. i talked to peter at skater and i got the scoop on the set up and it will run hard and be balanced right. it has 5's now and they will hold it. see ya charlie amann.

Face It

Well the sides are shot, smooth, flat & white. Got a nice buzz at the same time.

skatermike24

Ryan, I see Fred is selling his boat, whats up with that?

skatermike24

I fell the same way sometimes, Whats your next project?

Audiofn

Going through the same stuff with my boat. Please keep us posted on the progress so that we can all try and learn from one another on this one.

Jon

skatermike24

Sonic, nice ,I alway liked those boats, good luck!!!

merlin540

the sides look great and it will be ready for rigging soon i will post picks soon should be a real looker with the new/old agitator designs. LOOK OUT BOYS!!!