Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Looking for billet camera housings (https://www.offshoreonly.com/forums/general-boating-discussion/197540-looking-billet-camera-housings.html)

LubeJobs42 10-19-2008 10:28 PM

Looking for billet camera housings
 
Anyone know where you can get billet camera housings for the bullet style cctv cameras? I have seen some cool housings on some of the Nortechs. Not sure who makes them. Any info?

skater40 10-20-2008 11:59 AM

I sawsome at skater last week.You might call chris at 269-857-4308 and see if he can give you the info.

gerritm 10-20-2008 01:49 PM

They are not billet, but check out Ikelite camera housings. They are for diving and will be very tough, water proof, and easy to mount and operate with out opening. Just an idea.

puder 10-21-2008 10:59 AM

http://www.helmetcamera.com/

Mark 10-21-2008 01:00 PM

Here's a few sites for you. You may need to call for more specific info on hard-core housings, etc. Good Luck!

ezwatchstore.com
thespystore.com
camerasuperstore.com
supercircuits.com
camtechsurveillance.com
safetysaves.com
ati247.com
aventuratechnologies.com
surveillance-spy-cameras.com

It goes without saying, but ONLY use Sony cameras - Lenses AND Chip Board.

salesmanship 10-21-2008 01:19 PM

Or just buy a Nor-Tech!!!:p

Mark 10-21-2008 02:21 PM

Um, I'll gladly buy a Nor-Tech if Gino lends me the cash and pays for race fuel! :drink:

LubeJobs42 10-21-2008 03:24 PM


Originally Posted by salesmanship (Post 2721597)
Or just buy a Nor-Tech!!!:p

If you had any kind of business sense, you woulkd send me one then you could tell everyone that the MTI guys have to call you for parts!!:evilb: Should i email you my address???:drink:

Keytime 10-21-2008 06:06 PM


Originally Posted by puder (Post 2721477)

That's where I've gotten mine. No issues with 'em.

wrinkleface 10-21-2008 06:27 PM


Originally Posted by LubeJobs42 (Post 2721675)
If you had any kind of business sense, you woulkd send me one then you could tell everyone that the MTI guys have to call you for parts!!:evilb: Should i email you my address???:drink:

TS, can't argue w/ that logic!!!!!:cool-smiley-027:

LubeJobs42 10-21-2008 08:37 PM

Ok, It's driving me crazy! I have been through hundreds of threads looking for photos. What boat or boats have a very cool billet camera mount right over the windshield? It's a closed top boat. I thought it was a Nortech but it may be an Outerlimits. Anyone know which one i'm talking about?

44MTI 10-21-2008 08:42 PM

Ballistic had something like that. Let me know if you find something you like, I am also interested in something.

LubeJobs42 10-21-2008 08:50 PM


Originally Posted by 44MTI (Post 2721938)
Ballistic had something like that. Let me know if you find something you like, I am also interested in something.

Hi Mike,
I bought some very cool dvrs and cameras. I posted the guys info earlier. I will never be without a video camera again!

PhantomChaos 10-21-2008 10:36 PM

Look in the Formula section.....Lu Lyall

Spine Tingler 10-22-2008 08:20 AM


Originally Posted by LubeJobs42 (Post 2721950)
Hi Mike,
I bought some very cool dvrs and cameras. I posted the guys info earlier. I will never be without a video camera again!

LMAO!! I agree. Let me know as well. Thanks!

LubeJobs42 10-22-2008 08:44 AM


Originally Posted by Spine Tingler (Post 2722224)
LMAO!! I agree. Let me know as well. Thanks!

Don't have the same video camera conversation every year??:drink: Some day we will both have them!

44MTI 10-22-2008 08:51 AM


Originally Posted by LubeJobs42 (Post 2721950)
Hi Mike,
I bought some very cool dvrs and cameras. I posted the guys info earlier. I will never be without a video camera again!

I bet you won't LOL.:ernaehrung004:

Brad Zastrow 10-22-2008 10:09 AM

Gino,
Stop by Xtreme Marine and check out the camera I sent Larry. Self contained, records for a hour. Much cheaper and easier to use than all the equipment you are getting.
Sample of video I made.
http://www.youtube.com/watch?v=K_tNdP3h6Yo

89scarabIII 10-22-2008 08:44 PM

lubejobs this place should have what you need. I bought a helmet cam set up from them takes awesome video. It is being used on simmons marine P-4 race boat. Takes professional quality vid no housing neccessary camera is waterproof.

http://www.rfconcepts.co.uk/index.htm

bojoe2 10-22-2008 09:34 PM


Originally Posted by LubeJobs42 (Post 2721929)
Ok, It's driving me crazy! I have been through hundreds of threads looking for photos. What boat or boats have a very cool billet camera mount right over the windshield? It's a closed top boat. I thought it was a Nortech but it may be an Outerlimits. Anyone know which one i'm talking about?

jim h from nj nortech 43 look on the manhatan fun run thread pics

bojoe2 10-22-2008 10:02 PM

call Gary at superboat rigging he set speed racer up he drilled a camera into the edge of the tunnel between the deck and tunnel he set the boat up with gps/monitor

J Arruda 10-23-2008 12:33 AM


Originally Posted by LubeJobs42 (Post 2722239)
Don't have the same video camera conversation every year??:drink: Some day we will both have them!

We make our own.
They come for free on our boats LubeJob.
LOL.

LubeJobs42 10-23-2008 07:19 AM


Originally Posted by J Arruda (Post 2722942)
We make our own.
They come for free on our boats LubeJob.
LOL.

Your making it difficult to stay away!!

Spine Tingler 10-23-2008 08:25 AM


Originally Posted by LubeJobs42 (Post 2722239)
Don't have the same video camera conversation every year??:drink: Some day we will both have them!

No kidding, isn't that funny. OK, I'm committed!?:ernaehrung004:

44MTI 10-23-2008 08:37 AM


Originally Posted by Spine Tingler (Post 2723058)
No kidding, isn't that funny. OK, I'm committed!?:ernaehrung004:

Are you committed or do you need to be committed.:party-smiley-004:

Spine Tingler 10-23-2008 08:42 AM


Originally Posted by 44MTI (Post 2723068)
Are you committed or do you need to be committed.:party-smiley-004:

You do have a point. First call to all E-Dock board members: There will be a short meeting tonight @ Bru. Please text your confirmation of attendance! Many important items are to be discussed as well as a training session for KW!:eek:

wavesandwheels 11-04-2008 05:51 PM

Camera mounts/ wavesandwheels.net
 
Give me a call at WavesandWheels.net 573-302-1657.
MY company installs all of the Nor-tech audio systems and designs some of the audio systems for MTI. Please call me for more info.
Thanks Justin Wagner / Waves and Wheels


All times are GMT -5. The time now is 09:38 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.