Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   377 Talon cats (https://www.offshoreonly.com/forums/general-boating-discussion/198761-377-talon-cats.html)

Tazz 11-15-2008 09:06 AM

2 Attachment(s)
Here's a picture of the cabin, the seat backs fold down flat to make a good size sleeping area.

Mine has 600cu in. 750hp N/A's and runs 122mph in fresh water.

Tazz 11-15-2008 09:11 AM

1 Attachment(s)
The center rear seat folds down to make a step

Nice Pair 11-15-2008 11:03 AM

Talon 377
 
Went to the Blue Angels on San Francisco Bay 10-12-08

http://www.offshoreonly.com/gallery/...php?file=17383

Saw the Guys out and about.

http://www.offshoreonly.com/gallery/...php?file=17384

http://www.offshoreonly.com/gallery/...php?file=17382

glassdave 11-15-2008 01:09 PM

3 Attachment(s)

Originally Posted by Tazz (Post 2740169)
The center rear seat folds down to make a step

Eds has kind of a large compartment between the rear seats and forward bulkhead. Lots of room for rigging. Looks like your engine compartment is shorter to allow for the aft cabin. Its amazing the amount of different deck configurations there are especially for such a limited production boat. So Hustler still has the molds? when/what was the last made?


last ones a pretty cool pic. it was taken last year at Point Pleasant i believe . . . Charlie, Rocky,Bob . . . . very cool :cool:

Tazz 11-15-2008 01:26 PM

1 Attachment(s)
The engine compartment is plenty big, even with the cabin.

glassdave 11-15-2008 01:34 PM


Originally Posted by Tazz (Post 2740283)
The engine compartment is plenty big, even with the cabin.

gotta love that:D we swapped out an engine in a few hours saturday in Key West. so easy to get around in there. Eds is rigged on a rail system with trannys and drive shafts and there is still room to stand in front of the motors easy. Looks like yours are set back just a bit farther looks good, clean. I see you have B max's.

Tazz 11-15-2008 02:30 PM

1 Attachment(s)
Yes, Bmax drives. I've got them all sorted out and they're working good.


All times are GMT -5. The time now is 07:49 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.