Anyone have any details on who makes this RIB?
#1
Registered
Gold Member
Thread Starter
Join Date: May 2002
Location: Ma. / Lake Winni., NH
Posts: 1,803
Likes: 0
Received 2 Likes
on
2 Posts
Anyone have any details on who makes this RIB?
There seems to be more of these popping up over here in the US - either they really do perform well, or these guys have some big stones to take one on a poker run to KW!?
#2
Registered
Join Date: Feb 2005
Location: South Coast, UK
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered
I think Bruce at Express Engines, is a Distributor for a similar boat.
Video:
http://www.expressenginesusa.com/2068179.html
Julie
Video:
http://www.expressenginesusa.com/2068179.html
Julie
#5
Registered
Join Date: Feb 2005
Location: South Coast, UK
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Funnily enough, it's also the place where the owner of the one at Express Engines lives!!! Hampshire in the UK.
Small world innit?
Last edited by tony davis; 11-18-2008 at 09:07 AM. Reason: coz i can
#7
Registered
Gold Member
Thread Starter
Join Date: May 2002
Location: Ma. / Lake Winni., NH
Posts: 1,803
Likes: 0
Received 2 Likes
on
2 Posts
Found this thread
Looks like the same boat, with different options...
http://rib.net/forum/showthread.php?t=25998
Pretty freakin' sweet ride! Would make a cool - and unique - day boat, looks like it has some good freeboard and a sick dash set-up!!
http://rib.net/forum/showthread.php?t=25998
Pretty freakin' sweet ride! Would make a cool - and unique - day boat, looks like it has some good freeboard and a sick dash set-up!!
#8
Drive to arrive alive!!!
Platinum Member
There was a cool rib pulling out at the ramp at the Lauderdale show. The brand was Sealegs. Hydraulic driven wheels fold down and up the ramp and down the street you go. This thing was bada$$
This was a showboat, but all of the welds were top notch and the molds and machine work were top notch as well. Someone put a LOT of time into engineering on this.
This was a showboat, but all of the welds were top notch and the molds and machine work were top notch as well. Someone put a LOT of time into engineering on this.
#10
Platinum Member
Platinum Member