Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Boatring in S. FLorida Mon. and Tue. Dec. 15 and 16 (https://www.offshoreonly.com/forums/general-boating-discussion/200110-boatring-s-florida-mon-tue-dec-15-16-a.html)

rtaylor 12-12-2008 07:54 AM

Boatring in S. FLorida Mon. and Tue. Dec. 15 and 16
 
Anybody going to be on the water Monday or Tuesday? I am buring a couple of vacation days and will be out somewhere between Pompano and Miami.

rchevelle71 12-12-2008 09:23 PM


Originally Posted by rtaylor (Post 2757954)
Anybody going to be on the water Monday or Tuesday? I am buring a couple of vacation days and will be out somewhere between Pompano and Miami.

I have to work next week, but I am burning my days( and a ton of this cheap fuel while it lasts) the following 2 weeks if your around.

rtaylor 12-13-2008 08:55 AM

I'll remember that. I iwll probably be back down there. Here's my number: 201-783-9769

Randy

Pantera24 12-13-2008 05:55 PM

Unfortunately I can't this Monday or Tuesday but I'm planning on going out next weekend.?

rchevelle71 12-13-2008 10:11 PM


Originally Posted by Pantera24 (Post 2758819)
Unfortunately I can't this Monday or Tuesday but I'm planning on going out next weekend.?


Angel,

Let me know what your up to next weekend, I am in the middle of a remodel project on a bathroom in the house, but may be able to take a day to play:drink:

Xray50 12-14-2008 10:22 AM

I'm in for next weekend!

rchevelle71 12-15-2008 07:27 PM


Originally Posted by Xray50 (Post 2759044)
I'm in for next weekend!

Well,

I may be out, did rear brakes on the wifes Blazer yesterday(calipers), and had a hard time bleedeing them, come to find out I need a scan tool(the one GM uses at the dealer) to clear air in the ABS unit:eek:

rtaylor 12-16-2008 08:19 AM

Last call, Im in North Miami today and am headed out around Noon. 201-783-9769. Its 80, partly cloudy with 2-3's in 10 mph wind.
Randy

handfulz28 12-16-2008 09:07 AM


Originally Posted by rchevelle71 (Post 2759913)
come to find out I need a scan tool(the one GM uses at the dealer) to clear air in the ABS unit:eek:

HIJACK ON
Rick, you don't really need the scan tool. All it does is cycle the ABS pump instead of you turning the key on and off. Some GM ABS units have their own bleed screws. They can be bled the traditional "pump-hold-release" method. Otherwise the ignition key can be cycled and eventually you'll refill the ABS unit.
Good luck...
HIJACK OFF

lucky strike 12-16-2008 10:25 AM


Originally Posted by rtaylor (Post 2760147)
Last call, Im in North Miami today and am headed out around Noon. 201-783-9769. Its 80, partly cloudy with 2-3's in 10 mph wind.
Randy

It's raining here in Pompano....... Guess I'll go to work. :mad:


All times are GMT -5. The time now is 01:07 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.